I think these originally came from Keith M... https://lh3.googleusercontent.com/-n8ws96JB_Us/VR13nne0iiI/AAAAAAAADAg/xgWqV0TbMuo/w1299-h813-no/yanmarB_type_wiring.jpg https://lh3.googleusercontent.com/-I2Jm_D2DPW0/VR13n-e8cWI/AAAAAAAADAk/JYRPj2t7gRg/w1367-h813-no/yanmarA_type_wiring.jpg
Have fun! Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 2 April 2015 at 09:37, Curtis via CnC-List <cnc-list@cnc-list.com> wrote: > Does anybody have a photo of the back side of the insturment panel on a > Yanmar 2GM20F? > If I lift the test switch on the front panle the buzzer will sound, > However when I turn the key on to start the engine the oil pressure buzzer > is not sounding? > What is suspose happen when I stick the key in and turn it to the on > position it should Buzz untill I push the start button, the engine starts > and builds oil pressure there by turning the switch off? right? > then I pulled the wire off the top of the buzzer and tuched it to grounded > iron in the etempt to make the buzzer sound no luck. > Same thing with the temp with same results? > I think when I installed this engine I wired it incorrectly? > I'm at a loss and need help. I may have to hire someone to fix it? > So a photo would be great or a dirogram > > > thanks > -- > > *Best regards,* > > > *Curtis McDaniel, * > > > *C&C 30-MK1 East Coast Lady* > > Twenty years from now you will be more disappointed by the things that you > didn't do than by the ones you did do. So throw off the bowlines. Sail away > from the safe harbor. Catch the trade winds in your sails. Explore. Dream. > Discover. -Mark Twain > http://eastcostlady.blogspot.com/ > > > > *cpt.b...@gmail.com <bobhick...@rogers.com>* > > > *~~~~ __/) ~~~~* > > . > > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com