Cool. Have any of you installed a garboard drain in the C&C 35 for winter storage?
On Fri, May 8, 2015 at 4:05 PM, Neil Gallagher via CnC-List < cnc-list@cnc-list.com> wrote: > I use 3/8" for main and jib. > > Neil Gallagher > Weatherly, 35-1 > Glen Cove, NY > > > On 5/8/2015 3:05 PM, Kyle Mello via CnC-List wrote: > > That's great news. Did you switch your main halyard to 3/8's or 7/16? > > On Fri, May 8, 2015 at 2:58 PM, Neil Gallagher via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Kyle, >> >> I made the switch from wire to rope on my 35-1 without changing the >> sheaves. Works fine, no sign of unusual wear. >> >> Neil Gallagher >> Weatherly, 35-1 >> Glen Cove, NY >> >> >> >> >> On 5/8/2015 2:27 PM, Kyle Mello via CnC-List wrote: >> >> Hello, I have a 72 C&C 35 MK1 and I am looking fora advice on where to >> get some replacement sheaves. I am switching to rope from wire halyards. I >> have looked online and called Hall in my home town of Bristol without any >> luck. >> >> There are 3 sheaves that need to be replaced. See dimensions below. >> >> 2 larger sheaves are >> 4.1" in diameter or 104 mm >> center hole is 1/2" >> thickness is 1/2" >> >> Small sheave (main sail) >> 3.5" diameter >> center hole is 3/8" >> thickness is 7/16 >> >> As far as I can tell the boat was made in Canada by George Hinterholler. >> >> Any input would be helpful. >> >> -Kyle >> >> >> _______________________________________________ >> >> Email address:CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at:http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > > _______________________________________________ > > Email address:CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at:http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
