First coat of bottom paint has to go onto Interprotect 2000 while the
interprotect is still tacky, if I'm recalling correctly. I've
overcoated Interprotect with Micron CSX this way and had good results.
Graham Collins
Secret Plans
C&C 35-III #11
On 2015-10-12 10:57 AM, Chuck S via CnC-List wrote:
Brent,
That's weird. I'm taking a quess. Maybe there was some sanding dust
on the hull after sanding? Did you wipe the bottom with rags dipped
in a solvent, before painting? Is it peeled off or worn off. Got any
pictures?
Chuck
Resolute
1990 C&C 34R
Broad Creek, Magothy River, Md
------------------------------------------------------------------------
*From: *"Brent Driedger via CnC-List" <cnc-list@cnc-list.com>
*To: *"C&C List" <cnc-list@cnc-list.com>
*Cc: *"Brent Driedger" <bren...@highspeedcrow.ca>
*Sent: *Monday, October 12, 2015 12:25:06 AM
*Subject: *Stus-List VC17
Hi everyone and to my fellow Canadians, happy Thanksgiving.
I pulled Wild Rover out of the lake last weekend and found not to my
surprise that once again I have lost the majority of the VC17 I
painted onto the hull within 6 inches of the waterline.
I originally brought the hull back to bare gel coat with a random
orbital sander and sealed with 6 coats of Interprotect 2000. This was
sanded flat and roughed up prior to the VC application. The Vc goes on
as per the instructions but every year I loose that 6" or so. More
where the water is turbulent. It's frustrating watching others pull
boats with intact bottom paint, even those who clean their hulls every
couple of weeks.
Any idea what I'm doing wrong? This is all the more important as the
zebra mussel infestation in Lake Winnipeg requires a good paint job.
There were about a thousand of them on the little keel in front of my
rudder which like the top 6" had lost its VC17 from the lower
horizontal surface.
Brent Driedger
27-5
Lake Winnipeg.
Sent from my iPhone
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the
bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com