I also have a used Martec available. It has been a nice decoration in my office since I switched it for a Flex-o-Fold a few years back, but it does still work (just not in reverse...). It's for a 1" shaft and free with shipping costs to a good home.
Tim Branford, CT On Wed, Dec 23, 2015 at 9:41 AM, Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > There is a used Martec on Annapolis Craigslist. No relationship to the > seller. > Joel > > > On Wednesday, December 23, 2015, S Thomas via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Agree also. >> I replaced the original Michigan Wheel 2 blade on my 27 with a 2 blade >> geared Gori and got better "traction" in reverse, due I think to the >> increased surface area. >> >> Steve Thomas >> C&C27 MKIII >> Port Stanley, ON >> >> C&C36 MKI >> Merritt Island, FL >> >> ----- Original Message ----- From: "ahycrace--- via CnC-List" < >> cnc-list@cnc-list.com> >> To: <cnc-list@cnc-list.com> >> Cc: <ahycr...@cox.net> >> Sent: Tuesday, December 22, 2015 20:47 >> Subject: Re: Stus-List Folding prop for 30-1 with A4 >> >> >> I agree I have a max prop 2 blade and reverse is just incredible it's >>> like a tug boat is backing you up. >>> >>> Gary Kolc >>> 1976 38' MKII >>> Liberty >>> ---- Indigo via CnC-List <cnc-list@cnc-list.com> wrote: >>> >>>> "No two blade prop will do very well in reverse although I would get a >>>> geared one so that you can be sure that it opened." >>>> >>>> Have to disagree with this statement. My 35-III with a two blade >>>> Max-prop goes very well in reverse. In fact in tight situations I often >>>> prefer to extract myself in reverse! >>>> >>>> -- >>>> Jonathan >>>> Indigo C&C 35III >>>> SOUTHPORT CT >>>> >>>> > On Dec 22, 2015, at 10:10, Charlie Nelson via CnC-List > < >>>> cnc-list@cnc-list.com> wrote: >>>> > >>>> > No two blade prop will do very well in reverse although I would get a >>>> > geared one so that you can be sure that it opened. >>>> >>>> _______________________________________________ >>>> >>>> Email address: >>>> CnC-List@cnc-list.com >>>> To change your list preferences, including unsubscribing -- go to the >>>> bottom of page at: >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> >>>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> > > -- > Joel > 301 541 8551 > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
