Ok, I asked because I had a HIM on the aft starboard transom, and then a separate C&C plaque on the inside transom, port side. Having the self-tailing winches and new sails is great. I am sure you will enjoy sailing her Ahmet 1973 C&C 25 "Tabasco" WInthrop, MA
On Mon, Jan 25, 2016 at 8:54 PM, Mark McMenamy via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Ahmet, > > I'm lucky to have had the former owner put self tailing winches. It also > has new Doyle sails and a new Suzuki 9.9hp outboard. > > That's all I have for a HIN. > > Mark > > On Jan 25, 2016, at 8:31 PM, Ahmet via CnC-List <cnc-list@cnc-list.com> > wrote: > > Not sure, but I can send you privately my previous discussions. > New standing rigging is a good thing. Is there a plaque on the inside of > the transom that actually shows the hull id. ? > I did move the stanctions to the toe-rail, and added a electical bilge > pump. > I also replaced the winches with old aftermarket Lewmar T 30 self-tailing > winches. > I am replacing the washers for the keel bolts because they were very rusty. > Ahmet > > On Mon, Jan 25, 2016 at 7:49 PM, Mark McMenamy via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Hello, >> >> Thanks for the reply. It's ZCC255260976. I'm not quite sure how these >> forums work. Can I search for what you posted before and save you some >> typing? >> >> I actually haven't sailed it yet because it needs new standing rigging. >> It should be finished early next week. My only experience sailing is a >> Capri 25 so I appreciate the feedback. >> >> Thanks, >> >> Mark >> >> On Jan 25, 2016, at 7:42 PM, Ahmet via CnC-List <cnc-list@cnc-list.com> >> wrote: >> >> I just bought one last August and love it. >> A good friend has one too, so we race all the time. His is a 1974. >> What is your hull ID. Let me know what you want to know. I posted a few >> things in the past, and there is some pretty good info on the web. >> Ahmet >> 1973 C&C 25 "Tabasco" >> Winthrop, MA >> >> On Mon, Jan 25, 2016 at 7:35 PM, Mark McMenamy via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> Hello, >>> >>> My name is Mark McMenamy. I'm a new owner of a nice 1976 C&C 25 mk I >>> as well as a new sailer.....I'm a reformed power boater. I was curious if >>> anyone had information about the designer of this boat or any stories about >>> her development. I was told it's a Hinterhoeller design, but I haven't >>> been able to verify this. I just love this little boat and would >>> appreciate to know a little of her backstory. >>> >>> Thanks a million, >>> >>> Mark >>> >>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
