Congrats! I guess I'm not the newest owner on the list anymore. Sam C&C 35 mk III SF
On Thu, Feb 11, 2016 at 8:58 AM, Ken Heaton via CnC-List < cnc-list@cnc-list.com> wrote: > Very likely finished before the fire. Your full hull number and can tell > you what month your build started. The number on the transom that starts > ZCC40 something... > > Ours is ZCC37067C090 which translates as: > > ZCC = the three letter code for C&C Yachts. The first three characters are > a MIC (Manufacturer Identification Code) assigned by the Coast Guard to the > manufacturer. > > Characters four through eight are a serial number assigned by the > manufacturer. C&C used the first two of these to indicate the model (i.e. > boat length in feet) and the last three as serial number. > > 37 = 37' long (yours will have a 40 here as they stopped pretending it was > a 37" boat after 1993) > > 067 = Hull Number 67 of the series. > > C0 = March of 1990 > > 90 = 1990 Model Year > > http://www.boatsafe.com/nauticalknowhow/hin.htm > > Ken H. > > > > On 11 February 2016 at 00:07, Alan Liles via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Yes, 1994. I know that the factory burned that year and I wonder if it >> was built before that or finished somewhere else. >> >> Al Liles >> SV Elendil >> Victoria, BC >> >> >> On Feb 10, 2016, at 5:43 PM, Ken Heaton via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >> I also agree, great boat. Elindil is a 1994 I think? One of the newest >> Canadian C&C's out there. >> >> Congratulations. >> >> Ken Heaton & Anne Tobin >> S/V Salazar - Can 54955 >> C&C 37/40 XL - Hull # 67 >> Cape Breton Island, Nova Scotia >> >> http://www.racethecape.ca/the-race/entrants/salazar/ >> >> On 10 February 2016 at 21:17, Gary Russell via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> Al, >>> It's a great boat! Welcome. >>> Gary >>> S/V High Maintenance >>> '90 C&C 37+ >>> East Greenwich, RI, USA >>> >>> ~~~~~~~_/)~~~~~~ >>> >>> >>> On Wed, Feb 10, 2016 at 8:09 PM, Alan Liles via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>>> The deal just closed. I'm the new owner of C&C 37/40+ Elendil out of >>>> Victoria. >>>> >>>> Cheers, Al >>>> >>>> >>>> _______________________________________________ >>>> >>>> Email address: >>>> CnC-List@cnc-list.com >>>> To change your list preferences, including unsubscribing -- go to the >>>> bottom of page at: >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> >>>> >>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >>> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com