ZCC40088E394, so built May 93 but a 94 model? Oddly like the auto industry in the leeway between build dates and model years.
Cheers, Al > On Feb 11, 2016, at 8:58 AM, Ken Heaton via CnC-List <cnc-list@cnc-list.com> > wrote: > > Very likely finished before the fire. Your full hull number and can tell you > what month your build started. The number on the transom that starts ZCC40 > something... > > Ours is ZCC37067C090 which translates as: > > ZCC = the three letter code for C&C Yachts. The first three characters are a > MIC (Manufacturer Identification Code) assigned by the Coast Guard to the > manufacturer. > > Characters four through eight are a serial number assigned by the > manufacturer. C&C used the first two of these to indicate the model (i.e. > boat length in feet) and the last three as serial number. > > 37 = 37' long (yours will have a 40 here as they stopped pretending it was a > 37" boat after 1993) > > 067 = Hull Number 67 of the series. > > C0 = March of 1990 > > 90 = 1990 Model Year > > http://www.boatsafe.com/nauticalknowhow/hin.htm > > Ken H. > > > >> On 11 February 2016 at 00:07, Alan Liles via CnC-List >> <cnc-list@cnc-list.com> wrote: >> Yes, 1994. I know that the factory burned that year and I wonder if it was >> built before that or finished somewhere else. >> >> Al Liles >> SV Elendil >> Victoria, BC >> >> >>> On Feb 10, 2016, at 5:43 PM, Ken Heaton via CnC-List >>> <cnc-list@cnc-list.com> wrote: >>> >>> I also agree, great boat. Elindil is a 1994 I think? One of the newest >>> Canadian C&C's out there. >>> >>> Congratulations. >>> >>> Ken Heaton & Anne Tobin >>> S/V Salazar - Can 54955 >>> C&C 37/40 XL - Hull # 67 >>> Cape Breton Island, Nova Scotia >>> >>> http://www.racethecape.ca/the-race/entrants/salazar/ >>> >>>> On 10 February 2016 at 21:17, Gary Russell via CnC-List >>>> <cnc-list@cnc-list.com> wrote: >>>> Al, >>>> It's a great boat! Welcome. >>>> Gary >>>> S/V High Maintenance >>>> '90 C&C 37+ >>>> East Greenwich, RI, USA >>>> >>>> ~~~~~~~_/)~~~~~~ >>>> >>>> >>>>> On Wed, Feb 10, 2016 at 8:09 PM, Alan Liles via CnC-List >>>>> <cnc-list@cnc-list.com> wrote: >>>>> The deal just closed. I'm the new owner of C&C 37/40+ Elendil out of >>>>> Victoria. >>>>> >>>>> Cheers, Al >>>>> >>>>> >>>>> _______________________________________________ >>>>> >>>>> Email address: >>>>> CnC-List@cnc-list.com >>>>> To change your list preferences, including unsubscribing -- go to the >>>>> bottom of page at: >>>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> >>>> >>>> _______________________________________________ >>>> >>>> Email address: >>>> CnC-List@cnc-list.com >>>> To change your list preferences, including unsubscribing -- go to the >>>> bottom of page at: >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com