Brian, Did you get a quote from Southshore Yachts in Niagara-on-the-Lake? They have the original moulds and the CAN$ to US$ exchange is very much in your favour right now. (30% discount).
http://southshoreyachts.com/ I seem to think Foss Foam Products of Florida may have the correct mould as well. http://newrudders.com/ Ken H. On 18 March 2016 at 14:30, Brian Fry via CnC-List <cnc-list@cnc-list.com> wrote: > Rudder is in need of major repair. Got a quote for a replacement for less > than a repair, but not an exact copy (they don't have a mold). Also 2/3 the > cost of having a mold made and then a replacement made from that. > I had drilled a dozen holes to drain water over the winter to avoid > freeze expansion causing more damage. Found many of the holes drilled had > just voids behind them, no foam, others had a gritty white material that > was saturated with water. Saw pictures here and elsewhere of same rudder > repair needed. > > Message: 2 > Date: Fri, 18 Mar 2016 12:21:42 -0400 > From: John Pennie <j...@svpaws.net> > To: cnc-list@cnc-list.com > Subject: Re: Stus-List Rudder replacement > Message-ID: <2c82d7c8-8e02-4d7f-aec5-d405a536d...@svpaws.net> > Content-Type: text/plain; charset="us-ascii" > > I seriously considered this on my 51. Even had Rob design the new > rudder. In the end I decided that I couldn't justify the cost. > > Why are you looking to change? > > John > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
