I would add that you will have the best results and use the least about of remover if you take the time to mechanically remove/peal as much of the silicone as possible. The 3M Adhesive Remover can them be used to just remove the residue.
Anybody have any experience with the 3m adhesive remover and its effects on other silicone products like the residue from dielectric grease or Armour-All? Even some kids toys are made from silicone gel (creepy crawlers and splat balls). They can leave a residue on the walls that is impossible to clean or paint. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Apr 2, 2016 4:33 PM, "Franklin Schenk via CnC-List" < cnc-list@cnc-list.com> wrote: > I am trying to reseal the windows on a C&C 29. The previous owner used > Silicone and I would like to remove it and use the butyl tape. I read that > carburetor cleaner works better than acetone. I am open to any suggestions. > > The spacing on the machine screws also appear to be very large. I was > thinking about adding a few more screws at 5 to 6 inches apart. > > Frank > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!