I have a 13 X 9 on my 27MKIII which works well, so that sounds about right. 

Steve Thomas
Port Stanley, ON
  ----- Original Message ----- 
  From: Robin Drew via CnC-List 
  To: cnc-list@cnc-list.com 
  Cc: Robin Drew 
  Sent: Sunday, June 05, 2016 22:28
  Subject: Re: Stus-List Propeller


  Thanks. I just bought the boat and I'm pretty annoyed but sure the problem is 
that it's  worn and needs maintenance. I'm planning on removing it and putting 
a simple 2 blade prop on, at least for now.


  It's hard to get info about the size and pitch specs. However, I found a 
website in BC that has a prop calculator and it gave me 15" with 9" pitch for 
my boat (CNC 33/2), engine and transmission. Does this sound right?

  Any comments?
  Robin Drew
  Mobile: +1 514 4632060

  On May 29, 2016, at 4:32 AM, S Thomas via CnC-List <cnc-list@cnc-list.com> 
wrote:


    The obvious question in this case with a folding prop, is do all the blades 
open all the way?
    Once it is in the water it is hard to tell unless you can dive on it. 
    I bought a used 2 blade prop recently that is geared so that the halves are 
supposed to open evenly. The pins are so worn in the prop body that the gear 
teeth can jump one another and it gets stuck so that one blade does not open 
all the way. In my case the prop needs to be re-built. 
    The short answer is that anything that causes one blade to stick will cause 
the problem you describe. 
    There are other possibilities, but that is the easiest to check. 

    Steve Thomas
    C&C27 MKIII
    Port Stanley, ON  
      ----- Original Message ----- 
      From: Robin Drew via CnC-List 
      To: cnc-list@cnc-list.com 
      Cc: Robin Drew 
      Sent: Saturday, May 28, 2016 17:26
      Subject: Stus-List Propeller


      I have just purchased a C&C 33 mark 2 with a 2GMF engine. It has a 
clamshell-type folding propeller that, once in gear, is causing significant 
vibration above idle speed. What could be causing this?

      Robin Drew 
      Mobile: +1 514 4632060

      "The only thing we have to fear is fear itself" - FDR


--------------------------------------------------------------------------


      _______________________________________________

      This list is supported by the generous donations of our members. If you 
like what we do, please help us pay for our costs by donating. All 
Contributions are greatly appreciated!

    _______________________________________________

    This list is supported by the generous donations of our members. If you 
like what we do, please help us pay for our costs by donating. All 
Contributions are greatly appreciated!



------------------------------------------------------------------------------


  _______________________________________________

  This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!
_______________________________________________

This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!

Reply via email to