Raymarine rebuilt my 5000's linear drive for a short $550... Worth every penny.
David F. Risch (401) 419-4650 (cell) > Date: Mon, 13 Jun 2016 12:49:04 -0400 > To: cnc-list@cnc-list.com > Subject: Re: Stus-List Autopilot > From: cnc-list@cnc-list.com > CC: christian_tirti...@yahoo.com > > Paul, > The Autohelm 5000 is a fine piece of engineering, and the linear drive is > great. It steered for me for thousands of miles around the South Pacific and > Asia when I didn't have enough wind for the windvane. If I were you, I'd try > to get another drive from ebay and keep the existing system. It will save you > lots of money compared to buying a new one. > Chris > C&C 37 Northern Light > Halifax > > Sent from my iPad > > > On Jun 13, 2016, at 8:57 AM, cnc-list-requ...@cnc-list.com wrote: > > > > Send CnC-List mailing list submissions to > > cnc-list@cnc-list.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > or, via email, send a message with subject or body 'help' to > > cnc-list-requ...@cnc-list.com > > > > You can reach the person managing the list at > > cnc-list-ow...@cnc-list.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of CnC-List digest..." > > > > > > Today's Topics: > > > > 1. Re: Roller Furling Line (Marek Dziedzic) > > 2. Autopilot (Paul H.) (Paul Hood) > > 3. Re: Autopilot (Paul H.) (G Collins) > > 4. Re: Autopilot (Paul H.) (Josh Muckley) > > 5. Throttle and shift levers (Bradley Lumgair) > > 6. Re: Throttle and shift levers (Tim Sippel) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sun, 12 Jun 2016 12:03:28 -0400 > > From: Marek Dziedzic <dziedzi...@hotmail.com> > > To: <cnc-list@cnc-list.com> > > Subject: Re: Stus-List Roller Furling Line > > Message-ID: <blu407-eas105c2135f5984c3b92a9a54ce...@phx.gbl> > > Content-Type: text/plain; charset="utf-8" > > > > If you want to be really picky, there is a direct correlation. Not > > necessarily 1:1, but it is obviously, there. > > > > > > > > I went with a standard double braid, but we have much less choice locally. > > A lower stretch line would be probably better, but I never noticed the > > stretching that someone mentioned a few messages before. This may depend > > also on the size of the boat and the size of the genoa - mine are only 27? > > and 135%. > > > > > > > > With this kind of line I bought double the length of the boat plus some > > safety margin. I think I bought 70?, but at $0.5/ft. the extra 10 ft. did > > not matter. That $5 was a good insurance and what I cut off the end will be > > used, for sure, somewhere else. > > > > > > > > Marek > > > > 1994 C270, ?Legato? > > > > Ottawa, ON > > > > > > > > > > > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh > > Muckley via CnC-List > > Sent: Sunday, June 12, 2016 09:15 > > To: C&C List <cnc-list@cnc-list.com> > > Cc: Josh Muckley <muckl...@gmail.com> > > Subject: Re: Stus-List Roller Furling Line > > > > > > > > Jonathan, > > > > You are correct there isn't a direct correlation between furling line > > length and foot length. As I previously stated mine happens to be roughly > > 1:1 averaged over the entire furl. I am simply visually approximating the > > diameter of a full drum compared to a full sail roll. You're right the > > circumference of the roll during the first few wraps is much smaller than > > when the entire sail is rolled up. Yet the diameter of the drum stays > > nearly the same. I'll have to measure the actual length of line needed to > > furl next time I think about it. It will be interesting to see exactly > > what the ratio is. > > > > Josh > > > > On Jun 12, 2016 7:49 AM, "Indigo via CnC-List" <cnc-list@cnc-list.com > > <mailto:cnc-list@cnc-list.com> > wrote: > > > > I may be totally wrong, but I don't think there is a direct correlation > > between the length of the foot and length of furling line. The marker the > > diameter of the drum, the longer the circumference and thus the longer the > > line required for one rotation - but the circumference of a roll of sail > > will be potentially very different. > > > > -- > > Jonathan > > Indigo C&C 35III > > SOUTHPORT CT > > > >> On Jun 12, 2016, at 07:01, Josh Muckley via CnC-List > >> <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: > >> > >> plus the foot length (24') > > > > > > _______________________________________________ > > > > This list is supported by the generous donations of our members. If you > > like what we do, please help us pay for our costs by donating. All > > Contributions are greatly appreciated! > > > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20160612/b9adf63b/attachment-0001.html> > > > > ------------------------------ > > > > Message: 2 > > Date: Sun, 12 Jun 2016 21:06:22 -0400 > > From: "Paul Hood" <paul.h...@rogers.com> > > To: <cnc-list@cnc-list.com> > > Subject: Stus-List Autopilot (Paul H.) > > Message-ID: <012501d1c50f$cdb9eb30$692dc190$@rogers.com> > > Content-Type: text/plain; charset="us-ascii" > > > > I have an old Autohelm 5000 autopilot...yes it appears to be original. > > Boats obviously relatively new for me and although an autopilot is on the > > wish list, its not here yet. If this thing doesn't work or isn't worth even > > trying, then I'll immediately ripping it out. I'd use the controller hole > > immediately for something else. Here are the pics of the pieces. It seems > > to be all there and I'm not sure where to start to test. Not in the water > > yet. > > > > https://drive.google.com/folderview?id=0Bw4NOPYfe9OWeWRDSl82MG1Wa2s&usp=shar > > ing > > > > > > Paul Hood > > '82 C&C34 Georgian Bay > > > > > > > > > > > > > > ------------------------------ > > > > Message: 3 > > Date: Mon, 13 Jun 2016 01:45:05 +0000 > > From: G Collins <cnclistforw...@hotmail.com> > > To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> > > Cc: Paul Hood <paul.h...@rogers.com> > > Subject: Re: Stus-List Autopilot (Paul H.) > > Message-ID: > > > > <bn4pr14mb0515dacff7ae74fe66ef056bd8...@bn4pr14mb0515.namprd14.prod.outlook.com> > > > > Content-Type: text/plain; charset="Windows-1252" > > > > Hi Paul > > > > I'd test it! Until 2 years ago my boat had an Autohelm 4000 in use, it > > was fine for holding a straight line but not so good for tacking. I > > actually sold it on ebay for an amount that surprised me. > > > > Check Raymarine's web site, they have (had?) old manuals on there. And > > it looks like a good install of the drive down below. > > > > Your 3rd picture with the Brookes and Gatehouse is not part of the > > pilot, that is the old brain of a wind instrument. > > > > Graham Collins > > Secret Plans > > C&C 35-III #11 > > > >> On 2016-06-12 10:06 PM, Paul Hood via CnC-List wrote: > >> I have an old Autohelm 5000 autopilot...yes it appears to be original. > >> Boats obviously relatively new for me and although an autopilot is on the > >> wish list, its not here yet. If this thing doesn't work or isn't worth > >> even > >> trying, then I'll immediately ripping it out. I'd use the controller hole > >> immediately for something else. Here are the pics of the pieces. It seems > >> to be all there and I'm not sure where to start to test. Not in the water > >> yet. > >> > >> https://drive.google.com/folderview?id=0Bw4NOPYfe9OWeWRDSl82MG1Wa2s&usp=shar > >> ing > >> > >> > >> Paul Hood > >> '82 C&C34 Georgian Bay > >> > >> > >> > >> > >> _______________________________________________ > >> > >> This list is supported by the generous donations of our members. If you > >> like what we do, please help us pay for our costs by donating. All > >> Contributions are greatly appreciated! > >> . > > > > > > > > > > ------------------------------ > > > > Message: 4 > > Date: Mon, 13 Jun 2016 02:58:43 +0000 > > From: Josh Muckley <muckl...@gmail.com> > > To: "C&C List" <cnc-list@cnc-list.com> > > Subject: Re: Stus-List Autopilot (Paul H.) > > Message-ID: > > <ca+zacran85cikpcubsckqfxqfzayk0xerz_dsngx18nfrve...@mail.gmail.com> > > Content-Type: text/plain; charset="utf-8" > > > > I agree. Try it out and see. If it works then you may be able to postpone > > your investment in a new system. I think the wind instrument is/was > > providing input to the AP so that it could sail to the wind not just a > > magnetic coarse. > > > > It looks like the 3 knobs are for adjusting the response time. The manual > > will obviously explain. > > > > Good luck, > > Josh Muckley > > S/V Sea Hawk > > 1989 C&C 37+ > > Solomons, MD > > On Jun 12, 2016 9:09 PM, "Paul Hood via CnC-List" <cnc-list@cnc-list.com> > > wrote: > > > >> I have an old Autohelm 5000 autopilot...yes it appears to be original. > >> Boats obviously relatively new for me and although an autopilot is on the > >> wish list, its not here yet. If this thing doesn't work or isn't worth > >> even > >> trying, then I'll immediately ripping it out. I'd use the controller hole > >> immediately for something else. Here are the pics of the pieces. It seems > >> to be all there and I'm not sure where to start to test. Not in the water > >> yet. > >> > >> > >> https://drive.google.com/folderview?id=0Bw4NOPYfe9OWeWRDSl82MG1Wa2s&usp=shar > >> ing > >> > >> > >> Paul Hood > >> '82 C&C34 Georgian Bay > >> > >> > >> > >> > >> _______________________________________________ > >> > >> This list is supported by the generous donations of our members. If you > >> like what we do, please help us pay for our costs by donating. All > >> Contributions are greatly appreciated! > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20160613/37f655ce/attachment-0001.html> > > > > ------------------------------ > > > > Message: 5 > > Date: Mon, 13 Jun 2016 11:38:29 +0000 > > From: Bradley Lumgair <lumg...@hotmail.com> > > To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> > > Subject: Stus-List Throttle and shift levers > > Message-ID: > > > > <blupr01mb12362044bfee7e724293b779a6...@blupr01mb1236.prod.exchangelabs.com> > > > > Content-Type: text/plain; charset="utf-8" > > > > I reset the tension on the throttle cable before splashing this spring so > > the throttle would stay where set. Broke the plastic throttle lever on the > > weekend. So I ordered both the stainless ones from Marinepartdepot for less > > than half what Edson is asking. Hoping it's not a rip off > > The shifter lever on the left side of the pedestal seems to operate in > > reverse of what would be logical, as in I pull the lever back to shift to > > forward, is this standard for a 1985 33-2? Or has someone messed with the > > routing of the linkage? > > Thanks > > Brad > > "Pulse" 1985 C&C 33 Mk II > > Lake Huron > > > > [X][X] > > I'd rather be sailing > > > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20160613/60a5bd9e/attachment-0001.html> > > > > ------------------------------ > > > > Message: 6 > > Date: Mon, 13 Jun 2016 12:56:51 +0000 > > From: Tim Sippel <tim.sip...@rci.rogers.com> > > To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> > > Cc: Bradley Lumgair <lumg...@hotmail.com> > > Subject: Re: Stus-List Throttle and shift levers > > Message-ID: > > > > <blupr04mb6915c730fd45bc44e2f6a6eb0...@blupr04mb691.namprd04.prod.outlook.com> > > > > Content-Type: text/plain; charset="utf-8" > > > > Hi Brad , > > On my 33 mKii shift lever goes forward for forward , pull back for reverse. > > I have the stainless throttle lever , but not shift lever as the curve of > > the stainless lever hit the pedestal guard and wouldn?t engage forward > > > > > > Cheers > > > > > > > > > > Tim > > Matico C&C 33mkII > > > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bradley > > Lumgair via CnC-List > > Sent: Monday, June 13, 2016 7:38 AM > > To: cnc-list@cnc-list.com > > Cc: Bradley Lumgair <lumg...@hotmail.com> > > Subject: Stus-List Throttle and shift levers > > > > I reset the tension on the throttle cable before splashing this spring so > > the throttle would stay where set. Broke the plastic throttle lever on the > > weekend. So I ordered both the stainless ones from Marinepartdepot for less > > than half what Edson is asking. Hoping it's not a rip off > > The shifter lever on the left side of the pedestal seems to operate in > > reverse of what would be logical, as in I pull the lever back to shift to > > forward, is this standard for a 1985 33-2? Or has someone messed with the > > routing of the linkage? > > Thanks > > Brad > > "Pulse" 1985 C&C 33 Mk II > > Lake Huron > > [X][X] > > I'd rather be sailing > > > > > > > > > > > > ________________________________ > > This communication is confidential. We only send and receive email on the > > basis of the terms set out at > > www.rogers.com/web/content/emailnotice<http://www.rogers.com/web/content/emailnotice> > > > > > > > > Ce message est confidentiel. Notre transmission et r?ception de courriels > > se fait strictement suivant les modalit?s ?nonc?es dans l?avis publi? ? > > www.rogers.com/aviscourriel <http://www.rogers.com/aviscourriel> > > ________________________________ > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20160613/34858c93/attachment.html> > > > > ------------------------------ > > > > Subject: Digest Footer > > > > _______________________________________________ > > CnC-List mailing list > > CnC-List@cnc-list.com > > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > > > ------------------------------ > > > > End of CnC-List Digest, Vol 125, Issue 73 > > ***************************************** > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!