Good info, thanks. I'll see if others chime in. On Jun 22, 2016 12:13 PM, "Jim Reinardy via CnC-List" <cnc-list@cnc-list.com> wrote:
> Lorne, > > I am not sure if my setup is standard, but I have a group 24 starting > battery and 2 group 27 house batteries. They are all in the back berth > under an access panel. In mine, the battery boxes with covers just barely > fit without interfering with the access panel cover, so extra tall > batteries could be an issue. > > Regards, > > Jim Reinardy > C&C 30-2 "Firewater" > Milwaukee, WI > > ------------------------------ > Date: Wed, 22 Jun 2016 11:54:36 -0600 > To: cnc-list@cnc-list.com > Subject: Stus-List 30MKII batteries > From: cnc-list@cnc-list.com > CC: lorne.se...@gmail.com > > 1st, my boat is 2000 miles away so I can't check, so I appreciate the > help. > What size batteries can fit my 1988 30MKII? > My survey said a group 21 is bad. No such thing. I called and the old > man doesn't remember which is bad. I plan to pre buy my batteries since > they are all about 8-9 years old. > What is the required starting battery? > What size/group are the 2 house batteries? And, will two 6 volt GC2 > batteries fit, they are taller than Group 31 but narrower. > Thanks for any help. > > _______________________________________________ This list is supported by > the generous donations of our members. If you like what we do, please help > us pay for our costs by donating. All Contributions are greatly appreciated! > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!