What happened to it? Graham Collins Secret Plans C&C 35-III #11
On 2016-10-02 7:22 PM, Hoyt, Mike via CnC-List wrote: > Dwight > > Find out who bought Third Wave from Steve Davies. It may have had st60. That > boat was recently written off (sad end to a 37R) and possibly there are > available parts or entire instruments > > Mike > Persistence > Halifax, ns > ________________________________________ > From: CnC-List [cnc-list-boun...@cnc-list.com] on behalf of dwight veinot via > CnC-List [cnc-list@cnc-list.com] > Sent: October 2, 2016 11:34 AM > To: cnc-list@cnc-list.com > Cc: dwight veinot > Subject: Re: Stus-List test > > Thanks I tried to post many times but failed on my gmail account, that > was from my bellaliant account. I can reply on gmail but I never see > my posts on new topics. > > Anyway I sent asking for assistance from listers here with my > Raymarine st60+ speed display head. It shows only 0's and I tested it > with 2 different transducers. Got damaged along with my chart > plotter, vhf radio and stereo I think during an electrical storm near > end july which took out stuff in nearby houses. I have the st60+ > package wind speed and depth plus a graphic display all mounted in a > pod over the companionway, and all display heads match. I understand > that I can replace the speed display head with a new i50 head which > will work with the package but I want to try to maintain the matching > appearance. A local marine electronics repair shop agreed to check it > out even though they no longer service raymarine gear. Raymarine has > no repair shops around here so everything has to go to the US, that's > what the Binnacle told me. Problem with the unit is in a single ic > chip that is supposed to send 12 V to the transducer but only sends 4 > V. The tech informed me that the chip has no markings on it so he > couldn't source a new chip which is all he thinks I need, not even > from Raymarine was able to help him and what's more Raymarine no > longer carry the board that contains the chip. So I am asking here if > anyone may be able to help me with identifying the chip or maybe where > I can get the board that contains the chip. Also I would be very > interested in a used but functioning st60+ speed display head. Thanks > and sorry I don't know how to change the title of my post on this > gmail account > Dwight Veinot > C&C 35 MKII, Alianna > Head of St. Margaret's Bay, NS > d.ve...@bellaliant.net > > > > On Sun, Oct 2, 2016 at 10:28 AM, Joel Aronson via CnC-List > <cnc-list@cnc-list.com> wrote: >> Loud and clear >> Joel >> >> >> On Sunday, October 2, 2016, dwight veinot via CnC-List >> <cnc-list@cnc-list.com> wrote: >>> Dwight Veinot >>> C&C 35 MKII, Alianna >>> Head of St. Margaret's Bay, NS >>> d.ve...@bellaliant.net >>> >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> like what we do, please help us pay for our costs by donating. All >>> Contributions are greatly appreciated! >> >> >> -- >> Joel >> 301 541 8551 >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you like >> what we do, please help us pay for our costs by donating. All Contributions >> are greatly appreciated! >> > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated! > > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated! > . > _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
