Joe,
It does not leak nor overheat. However, I'm worried about electrolysis
as the zincs have not been changed in the last two and a half years and
there is lot of green coating on it at the ends and fittings.
I'm planning on taking the boat from Mobile Bay to Washington NC the end
of March by water, so I have a little time to get it right. Just don't
want a problem once I'm on the move.
I'll be back to the boat week after next. I'll pull the caps off and
check the zinc and see what the condition looks like. Maybe I can find a
shop that can give me a quick turn around if it looks bad.
All my previous boats are/were raw water cooled A4s. I'm just not
familiar with exchangers and their possible failure issues.
Thanks,
Mark
On 2/16/2017 9:50 AM, Joe Della Barba via CnC-List wrote:
Does it leak or overheat?
Joe Della Barba
j...@dellabarba.com
*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
*Dennis C. via CnC-List
*Sent:* Wednesday, February 15, 2017 1:02 PM
*To:* CnClist <cnc-list@cnc-list.com>
*Cc:* Dennis C. <capt...@gmail.com>
*Subject:* Re: Stus-List C&C 37/40+ Universal M-35 heat exchanger
I'd take it to a local radiator shop and see what they think. They
might refurbish it for a lot less than $300.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Wed, Feb 15, 2017 at 11:46 AM, Mark Baldridge via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
302631
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
