When I sell windstar I'm going to stash all kinds of weird unrelated junk and oddball tools in the lockers just to baffle the new owner.... will fill the list for weeks! :-)
Dave Sent from my iPhone > On May 5, 2017, at 1:39 AM, Leslie Paal <lpaalc...@yahoo.com> wrote: > > actually that is way too big for a galvanic isolator. But it is about the > correct value for a ferro-resonant battery charger; notice the AC rating. > The charger uses a synchronous loop (L & C, tuned to 60Hz) to keep the supply > voltage fairly constant. The charger part just uses a diode bridge, no > regulation. > > I'm afraid it will not make your boat sail faster, actually those weigh a ton > so probably want to go with the modern semiconductor based version. ;-) > > Leslie. > > -------------------------------------------- > On Thu, 5/4/17, svpegasus38 via CnC-List <cnc-list@cnc-list.com> wrote: > > Subject: Re: Stus-List DQOTD - What is a Arcotronic 50 uf Capacitor for? > To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> > Cc: "svpegasus38" <svpegasu...@gmail.com> > Date: Thursday, May 4, 2017, 1:08 PM > > Couldn't > agree more, Lee. > > > Sent from my T-Mobile > 4G LTE DeviceDoug > Mountjoy POYC Pegasus Lf38 > -------- Original > message --------From: Lee Youngblood via CnC-List > <cnc-list@cnc-list.com> Date: 5/4/17 13:02 > (GMT-08:00) To: CnC-List > <cnc-list@cnc-list.com> Cc: Lee Youngblood > <leeyoungbl...@earthlink.net> Subject: Re: > Stus-List DQOTD - What is a Arcotronic 50 uf Capacitor for? > > Hi All, > Back > on earth, gear heads who read practical science, could > engineer all kinds of things themselves. I’m guessing a > galvanic isolator was planned, and like many projects never > quiet finished. Then the lawyers out numbered the > engineers, lots of paper work ensued, and surveyors wanted > monitors or some kind of fail-safe device to save us all. > Occasionally the surveyors would tell stories of kids and > moms electrocuted just off the boat, usually in fresh water. > So now the boats are too expensive for mortals to work on > the boat, and they sit in harbors while, the owners work to > pay for the marketing. . . > Clearly time for me to get off the > dock. . . > LeeBlinded in Seattle > > > > > On May 4, 2017, at > 12:49 00PM, Edd Schillay via CnC-List <cnc-list@cnc-list.com> > wrote: > Chuck, > Hilarious — and kudos to anyone who > understands the oscillation overthruster reference — cause > no matter where you go, there you are. > No > flux capacitors on my boat — we go back in time by > engaging the warp drive and slingshotting around the > sun. > Seriously — we do have a warp core > on board: > https://dl.dropboxusercontent.com/u/15162917/ENTERPRISE/WarpCore.mov > (Ok > — it’s a Bluetooth speaker) > > > > All the > best, > Edd > > Edd M. SchillayStarship EnterpriseC&C 37+ | Sail No: > NCC-1701-BCity Island, > NY Starship > Enterprise's Captain's Log > > > > > > On May 4, 2017, at > 3:27 PM, Chuck Gilchrest via CnC-List <cnc-list@cnc-list.com> > wrote: > I > think Edd Schillay probably has several flux capacitors on > board the Starship Enterprise along with a set of spare > di-lithium crystals. Now if I can only find somebody > selling an oscillation overthruster, then I can take Half > Magic to the 8th Dimension > although I probably need to go to New Jersey to find > one..Ok..enough! I’m done with the silly sci-fi > references. Back to toe rail varnishing.. (must be the > fumes…sigh..)Chuck GilchrestS/V Half Magic1983 Landfall 35Padanaram, MA From: > CnC-List > [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary > Russell via CnC-List > Sent: Thursday, > May 4, 2017 5:23 AM > To: C&C > List <cnc-list@cnc-list.com> > Cc: Gary > Russell <captnga...@gmail.com> > Subject: Re: > Stus-List DQOTD - What is a Arcotronic 50 uf Capacitor > for? > Nah! It's a flux capacitor and it's > used for time travel. It allows you to sail your boat > "Back to the Future". > GaryS/V Kaylarah'90 C&C 37+East Greenwich, RI, USA > ~~~~~~~_/)~~~~~~ > On > Wed, May 3, 2017 at 9:33 PM, Josh Muckley via CnC-List > <cnc-list@cnc-list.com> > wrote:That size cap has to be for an inverter or > maybe an older analog radar. > Josh MuckleyS/V Sea Hawk1989 C&C 37+Solomons, MD > On > May 3, 2017 9:00 PM, "Bruce Whitmore via CnC-List" > <cnc-list@cnc-list.com> > wrote:OK, in the box of parts left behind by the > prior owner of our 1994 C&C 37/40+ are two Arcotronics > C.87.0EF3 50uf capacitors. You can see a picture of them > here: 1pcs - > ARCOTRONICS 50uF /50µF 450V(50Hz) 500V(180/15) Capacitor - > C.87.0EE3 MKP | eBay > And, > they're not exactly cheap, even on Ebay. > > What are > these things for? > > Thanks in advance! > Bruce > > $ 35.0 1pcs - ARCOTRONICS 50uF /50µF 450V(50Hz) > 500V(180/15) Capacitor - C.87.0EE...1pcs - > ARCOTRONICS 50uF /50µF 450V(50Hz) 500V(180/15) Capacitor - > C.87.0EE3 MKP > > Bruce > Whitmore > > (847) > 404-5092 (mobile) > bwhitm...@sbcglobal.net > _______________________________________________ > > This list is supported by the generous > donations of our members. If you wish to make a contribution > to offset our costs, please go to: https://www.paypal.me/stumurray > > All Contributions are greatly > appreciated! > _______________________________________________ > > This list is supported by the generous > donations of our members. If you wish to make a contribution > to offset our costs, please go to: https://www.paypal.me/stumurray > > All Contributions are greatly > appreciated! > _______________________________________________ > > This > list is supported by the generous donations of our members. > If you wish to make a contribution to offset our costs, > please go to: https://www.paypal.me/stumurray > > All > Contributions are greatly > appreciated! > _______________________________________________ > > This list is supported by the generous > donations of our members. If you wish to make a contribution > to offset our costs, please go to: https://www.paypal.me/stumurray > > All Contributions are greatly > appreciated! > > _______________________________________________ > > This list is supported by the > generous donations of our members. If you wish to make a > contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly > appreciated! > > > _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
