I would only reapply gelcoat if your concerned it about the cosmetics. The
multiple coats of epoxy barrier coat will take care of the bare spots.
On May 6, 2017 9:02 AM, <cnc-list-requ...@cnc-list.com> wrote:
Send CnC-List mailing list submissions to
cnc-list@cnc-list.com
To subscribe or unsubscribe via the World Wide Web, visit
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
or, via email, send a message with subject or body 'help' to
cnc-list-requ...@cnc-list.com
You can reach the person managing the list at
cnc-list-ow...@cnc-list.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of CnC-List digest..."
Today's Topics:
1. Re: DQOTD - What is a Arcotronic 50 uf Capacitor for? (Dennis C.)
2. Re: DQOTD - What is a Arcotronic 50 uf Capacitor for? (Dennis C.)
3. Re: Battery Charger (Gary Russell)
4. Re: Battery Charger (j...@mymts.net)
5. Re: Battery Charger (Matthew L. Wolford)
6. Stripping the bottom (Adam Hayden)
---------- Forwarded message ----------
From: "Dennis C." <capt...@gmail.com>
To: CnClist <cnc-list@cnc-list.com>
Cc:
Bcc:
Date: Fri, 5 May 2017 21:26:13 -0500
Subject: Re: Stus-List DQOTD - What is a Arcotronic 50 uf Capacitor for?
Be sure and put a couple shaft zincs a size too small in the spare engine
parts bin.
Dennis C.
On Fri, May 5, 2017 at 8:13 PM, Dave S via CnC-List <cnc-list@cnc-list.com>
wrote:
> When I sell windstar I'm going to stash all kinds of weird unrelated junk
> and oddball tools in the lockers just to baffle the new owner.... will
> fill the list for weeks! :-)
>
> Dave
>
>
>
> Sent from my iPhone
>
> > On May 5, 2017, at 1:39 AM, Leslie Paal <lpaalc...@yahoo.com> wrote:
> >
> > actually that is way too big for a galvanic isolator. But it is about
> the correct value for a ferro-resonant battery charger; notice the AC
> rating. The charger uses a synchronous loop (L & C, tuned to 60Hz) to keep
> the supply voltage fairly constant. The charger part just uses a diode
> bridge, no regulation.
> >
> > I'm afraid it will not make your boat sail faster, actually those weigh
> a ton so probably want to go with the modern semiconductor based version.
> ;-)
> >
> > Leslie.
> >
> > --------------------------------------------
> > On Thu, 5/4/17, svpegasus38 via CnC-List <cnc-list@cnc-list.com> wrote:
> >
> > Subject: Re: Stus-List DQOTD - What is a Arcotronic 50 uf Capacitor for?
> > To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
> > Cc: "svpegasus38" <svpegasu...@gmail.com>
> > Date: Thursday, May 4, 2017, 1:08 PM
> >
> > Couldn't
> > agree more, Lee.
> >
> >
> > Sent from my T-Mobile
> > 4G LTE DeviceDoug
> > Mountjoy POYC Pegasus Lf38
> > -------- Original
> > message --------From: Lee Youngblood via CnC-List
> > <cnc-list@cnc-list.com> Date: 5/4/17 13:02
> > (GMT-08:00) To: CnC-List
> > <cnc-list@cnc-list.com> Cc: Lee Youngblood
> > <leeyoungbl...@earthlink.net> Subject: Re:
> > Stus-List DQOTD - What is a Arcotronic 50 uf Capacitor for?
> >
> > Hi All,
> > Back
> > on earth, gear heads who read practical science, could
> > engineer all kinds of things themselves. I’m guessing a
> > galvanic isolator was planned, and like many projects never
> > quiet finished. Then the lawyers out numbered the
> > engineers, lots of paper work ensued, and surveyors wanted
> > monitors or some kind of fail-safe device to save us all.
> > Occasionally the surveyors would tell stories of kids and
> > moms electrocuted just off the boat, usually in fresh water.
> > So now the boats are too expensive for mortals to work on
> > the boat, and they sit in harbors while, the owners work to
> > pay for the marketing. . .
> > Clearly time for me to get off the
> > dock. . .
> > LeeBlinded in Seattle
> >
> >
> >
> >
> > On May 4, 2017, at
> > 12:49 00PM, Edd Schillay via CnC-List <cnc-list@cnc-list.com>
> > wrote:
> > Chuck,
> > Hilarious — and kudos to anyone who
> > understands the oscillation overthruster reference — cause
> > no matter where you go, there you are.
> > No
> > flux capacitors on my boat — we go back in time by
> > engaging the warp drive and slingshotting around the
> > sun.
> > Seriously — we do have a warp core
> > on board: https://dl.dropboxusercontent.com/u/15162917/ENTERPRISE/Warp
> Core.mov
> > (Ok
> > — it’s a Bluetooth speaker)
> >
> >
> >
> > All the
> > best,
> > Edd
> >
> > Edd M. SchillayStarship EnterpriseC&C 37+ | Sail No:
> > NCC-1701-BCity Island,
> > NY Starship
> > Enterprise's Captain's Log
> >
> >
> >
> >
> >
> > On May 4, 2017, at
> > 3:27 PM, Chuck Gilchrest via CnC-List <cnc-list@cnc-list.com>
> > wrote:
> > I
> > think Edd Schillay probably has several flux capacitors on
> > board the Starship Enterprise along with a set of spare
> > di-lithium crystals. Now if I can only find somebody
> > selling an oscillation overthruster, then I can take Half
> > Magic to the 8th Dimension
> > although I probably need to go to New Jersey to find
> > one..Ok..enough! I’m done with the silly sci-fi
> > references. Back to toe rail varnishing.. (must be the
> > fumes…sigh..)Chuck GilchrestS/V Half Magic1983 Landfall 35Padanaram, MA
> From: CnC-List
> > [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary
> > Russell via CnC-List
> > Sent: Thursday,
> > May 4, 2017 5:23 AM
> > To: C&C
> > List <cnc-list@cnc-list.com>
> > Cc: Gary
> > Russell <captnga...@gmail.com>
> > Subject: Re:
> > Stus-List DQOTD - What is a Arcotronic 50 uf Capacitor
> > for?
> > Nah! It's a flux capacitor and it's
> > used for time travel. It allows you to sail your boat
> > "Back to the Future".
> > GaryS/V Kaylarah'90 C&C 37+East Greenwich, RI, USA
> > ~~~~~~~_/)~~~~~~
> > On
> > Wed, May 3, 2017 at 9:33 PM, Josh Muckley via CnC-List
> > <cnc-list@cnc-list.com>
> > wrote:That size cap has to be for an inverter or
> > maybe an older analog radar.
> > Josh MuckleyS/V Sea Hawk1989 C&C 37+Solomons, MD
> > On
> > May 3, 2017 9:00 PM, "Bruce Whitmore via CnC-List"
> > <cnc-list@cnc-list.com>
> > wrote:OK, in the box of parts left behind by the
> > prior owner of our 1994 C&C 37/40+ are two Arcotronics
> > C.87.0EF3 50uf capacitors. You can see a picture of them
> > here: 1pcs -
> > ARCOTRONICS 50uF /50µF 450V(50Hz) 500V(180/15) Capacitor -
> > C.87.0EE3 MKP | eBay
> > And,
> > they're not exactly cheap, even on Ebay.
> >
> > What are
> > these things for?
> >
> > Thanks in advance!
> > Bruce
> >
> > $ 35.0 1pcs - ARCOTRONICS 50uF /50µF 450V(50Hz)
> > 500V(180/15) Capacitor - C.87.0EE...1pcs -
> > ARCOTRONICS 50uF /50µF 450V(50Hz) 500V(180/15) Capacitor -
> > C.87.0EE3 MKP
> >
> > Bruce
> > Whitmore
> >
> > (847)
> > 404-5092 (mobile)
> > bwhitm...@sbcglobal.net
> > _______________________________________________
> >
> > This list is supported by the generous
> > donations of our members. If you wish to make a contribution
> > to offset our costs, please go to: https://www.paypal.me/stumurray
> >
> > All Contributions are greatly
> > appreciated!
> > _______________________________________________
> >
> > This list is supported by the generous
> > donations of our members. If you wish to make a contribution
> > to offset our costs, please go to: https://www.paypal.me/stumurray
> >
> > All Contributions are greatly
> > appreciated!
> > _______________________________________________
> >
> > This
> > list is supported by the generous donations of our members.
> > If you wish to make a contribution to offset our costs,
> > please go to: https://www.paypal.me/stumurray
> >
> > All
> > Contributions are greatly
> > appreciated!
> > _______________________________________________
> >
> > This list is supported by the generous
> > donations of our members. If you wish to make a contribution
> > to offset our costs, please go to: https://www.paypal.me/stumurray
> >
> > All Contributions are greatly
> > appreciated!
> >
> > _______________________________________________
> >
> > This list is supported by the
> > generous donations of our members. If you wish to make a
> > contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
> >
> > All Contributions are greatly
> > appreciated!
> >
> >
> >
>
> _______________________________________________
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
>
> All Contributions are greatly appreciated!
>
---------- Forwarded message ----------
From: "Dennis C." <capt...@gmail.com>
To: CnClist <cnc-list@cnc-list.com>
Cc:
Bcc:
Date: Fri, 5 May 2017 21:29:34 -0500
Subject: Re: Stus-List DQOTD - What is a Arcotronic 50 uf Capacitor for?
Yup. I got one of those somewhere. I'm going to need it next week to
reload the bearings in the 22mm traveler of the beach cat I'm restoring.
If I can't find it, I'll just use shaving cream.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Fri, May 5, 2017 at 8:20 PM, Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:
> The PO of my boat left everything! I tried to sort through it all and
> ended up trashing a bunch of stuff. One thing which I fortunately held
> onto was a blue plastic thing in the shape of a capital i. It almost
> looked like a section from a toy monorail...but it said "harken". So I
> kept it. A few years later I finally figured out that it was for reloading
> the balls into the traveler car!
---------- Forwarded message ----------
From: Gary Russell <captnga...@gmail.com>
To: "C&C List" <cnc-list@cnc-list.com>
Cc:
Bcc:
Date: Sat, 6 May 2017 06:56:15 -0400
Subject: Re: Stus-List Battery Charger
My Guest Pro 2815 died the same way. I replaced mine with a ProMariner
Pronautic 1230P.
Gary
S/V Kaylarah
'90 C&C 37+
East Greenwich, RI, USA
~~~~~~~_/)~~~~~~
On Fri, May 5, 2017 at 9:45 PM, robert via CnC-List <cnc-list@cnc-list.com>
wrote:
> My old Guest Pro Battery Charger Model 2815 seems to have hit the
> dust....it was working yesterday but today it was not....no charge going to
> batteries and no lights on on the charger....'red' when it is charging
> 'green' when in float mode. There is an exterior fuse which I checked and
> it looks fine....maybe I should replace it just to be sure. I have no idea
> how old this device is or how long they are supposed to last.
>
> Is there anything else I could check?
>
> However, if it has simply 'expired', any suggestions on what I might
> replace it with?
>
> Rob Abbott
> AZURA
> C&C 32 -84
> Halifax, N.S.
>
>
> _______________________________________________
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
>
> All Contributions are greatly appreciated!
>
---------- Forwarded message ----------
From: "j...@mymts.net" <j...@mymts.net>
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Cc:
Bcc:
Date: Sat, 6 May 2017 07:15:51 -0500
Subject: Re: Stus-List Battery Charger
I was looking at installing a Genius Gen2 20A unit. I found some good
reviews on it. Anyone have experience with this one?
James
Flamingo IV
'71 C&C 35
Lake of the Woods, Ontario
Sent from my iPad
On May 6, 2017, at 5:56 AM, Gary Russell via CnC-List <cnc-list@cnc-list.com>
wrote:
My Guest Pro 2815 died the same way. I replaced mine with a ProMariner
Pronautic 1230P.
Gary
S/V Kaylarah
'90 C&C 37+
East Greenwich, RI, USA
~~~~~~~_/)~~~~~~
On Fri, May 5, 2017 at 9:45 PM, robert via CnC-List <cnc-list@cnc-list.com>
wrote:
> My old Guest Pro Battery Charger Model 2815 seems to have hit the
> dust....it was working yesterday but today it was not....no charge going to
> batteries and no lights on on the charger....'red' when it is charging
> 'green' when in float mode. There is an exterior fuse which I checked and
> it looks fine....maybe I should replace it just to be sure. I have no idea
> how old this device is or how long they are supposed to last.
>
> Is there anything else I could check?
>
> However, if it has simply 'expired', any suggestions on what I might
> replace it with?
>
> Rob Abbott
> AZURA
> C&C 32 -84
> Halifax, N.S.
>
>
> _______________________________________________
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
>
> All Contributions are greatly appreciated!
>
_______________________________________________
This list is supported by the generous donations of our members. If you
wish to make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
---------- Forwarded message ----------
From: "Matthew L. Wolford" <wolf...@erie.net>
To: <cnc-list@cnc-list.com>
Cc:
Bcc:
Date: Sat, 6 May 2017 08:45:20 -0400
Subject: Re: Stus-List Battery Charger
I had two Guest chargers on previous boats that similarly just died. On my
current boat I installed a Charles 3-bank (I think it's 30 amp) "smart"
charger. It was expensive, but is robust. I haven't had any issues since
I installed it several years ago.
-----Original Message----- From: robert via CnC-List
Sent: Friday, May 05, 2017 9:45 PM
To: cnc-list@cnc-list.com
Cc: robert
Subject: Stus-List Battery Charger
My old Guest Pro Battery Charger Model 2815 seems to have hit the
dust....it was working yesterday but today it was not....no charge going
to batteries and no lights on on the charger....'red' when it is
charging 'green' when in float mode. There is an exterior fuse which I
checked and it looks fine....maybe I should replace it just to be sure.
I have no idea how old this device is or how long they are supposed to last.
Is there anything else I could check?
However, if it has simply 'expired', any suggestions on what I might
replace it with?
Rob Abbott
AZURA
C&C 32 -84
Halifax, N.S.
_______________________________________________
This list is supported by the generous donations of our members. If you
wish to make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
---------- Forwarded message ----------
From: Adam Hayden <hayden.a...@hotmail.com>
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Cc:
Bcc:
Date: Sat, 6 May 2017 13:01:33 +0000
Subject: Stus-List Stripping the bottom
Hey everyone.
I am in the middle of stripping the bottom paint off of my C&C 36. I
would day tjere is 30 years of bottom paint. There are no blisters juat
that muck of thr oaint was flaking off. Once done I will be doing the
barrier coat and reapplying the bottom paint. I burned through the
gelcoat in a few places while sanding.
My question is do i need to apply a coat of gelcoat to those places or will
the barrier coat protect the glass and prevent moisture intrusion.
I can honestly say this won't be a job that I will tackle again on this
boat.
Thanks
Adam
Get Outlook for Android <https://aka.ms/ghei36>
_______________________________________________
CnC-List mailing list
CnC-List@cnc-list.com
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
