Only one battery and it won't accept a charge.....now in the garbage.
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2017-05-23 2:39 PM, Franklin Schenk wrote:
I have heard that the best way to dry an electrical item is to put it
in an oven at low heat. I have a drill motor like yours that I bought
on sale at Ace hardware. BTW, I assume you still have a second
battery so if you can salvage the motor you are not at a total loss.
Frank
On Tuesday, May 23, 2017 7:58 AM, robert via CnC-List
<cnc-list@cnc-list.com> wrote:
Genius here was attaching fenders to the slip with his 'lithium ion
battery powered 20V drill' and I kicked it over the side into 12 feet of
salt water. It stayed on the bottom for 2 days but yesterday I was able
to retrieve it, flushed it with fresh water, dried it and sprayed it
later with WD-40 and left it to dry out in the garage.
Is it a 'lost cause'? Should I have just left it on the bottom?
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
_______________________________________________
This list is supported by the generous donations of our members. If
you wish to make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
