I used PlasTeak, bought it from Defender. Only draw back is it cannot be removed like the old panels. I screwed down epoxied coated plywood then applied the PlasTeak. If you go this route make sure you make access panels to access the full length of the bilge.
Mike PERSUASION C&C 37 K/CB Long Sault > On May 28, 2017, at 10:31 AM, Indigo via CnC-List <cnc-list@cnc-list.com> > wrote: > > The teak and holly flooring on Indigo desperately needs replacing. > > I have 1 question for 35mk3 owners and one for all listers! > > 1. Can the flooring be replaced without removing vertical grab bar by the > galley. Access to the upper end of this grab bar is under the companionway > hatch cover? > > 2. What alternatives to teak and holly would listers recommend. I am not sure > investment in the real stuff is warranted for a nearly 35 yr old boat. > > -- > Jonathan > Indigo C&C 35III > SOUTHPORT CT > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
