I've seen a few mounted in the companionway with a RAM bracket like this: http://www.rammount.com/part/RAM-109VU
Dennis C. On Tue, Jun 27, 2017 at 4:00 PM, Jeremy Ralph via CnC-List < cnc-list@cnc-list.com> wrote: > Hi All, > > I've bought a new 9" chart plotter for install on my tiller steered C&C34. > The boat has a small companionway dodger. > > I hooked the plotter up and experimented with some possible locations. > I'm leaning toward mounting it on a RAM mount on top of the companionway > slider. What I'm not sure about is how to deal with the wiring... Some > options: > > 1. Have wires go onto top (exterior) of slider with enough length to open > slider. When slider is open wire slack would bunch on top of slider. > > 2. Have wires come up through bottom of RAM mount. Wire slack would bunch > in cabin when the hatch is closed. (Wires come out of cabin liner near > companion way) > > Any recommendations from the group? > > Thanks, > Jeremy > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!