Tom, Have you contacted Marine Cradle Shop in Sutton, ON? They make a lot of cradles for sailboats. I think that 80% of cradles in our Club were made by them.
They can be found here: http://cradleridetrailers.com/ I am pretty confident that they have the exact specifications for your boat. When I bought my boat 4 years ago and needed a cradle they had all the necessary information. I used a local shop (save on shipping and a bit on the cradle). Again, he had the specs. Marek 1994 C270 Legato Ottawa, ON From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of T power via CnC-List Sent: Saturday, September 16, 2017 07:46 To: Matthew L. Wolford via CnC-List <cnc-list@cnc-list.com> Cc: T power <sv_invic...@outlook.com> Subject: Re: Stus-List Cradle measurments It would be really cool to be able to do that, unfortunately where I live there are no facilities, the residents here rent the crane and haul all boats in one day, not sure how I'm going to like this 😊 Would you happen to know the approximate length of your stands from the base to the top of the pads. I'm going off a C&C 27 MK IV cradle, the stands are averaging 27 3/4 inches which seems short. Cheers, Tom Power Invictus C&C 30 MK1 Fredericton, NB ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>> on behalf of Matthew L. Wolford via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: Friday, September 15, 2017 11:59 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Matthew L. Wolford Subject: Re: Stus-List Cradle measurments When we made mine, we hung the boat in a travelift for a couple days while the fabricator built the cradle around the boat. From: T power via CnC-List<mailto:cnc-list@cnc-list.com> Sent: Friday, September 15, 2017 6:06 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: T power<mailto:sv_invic...@outlook.com> Subject: Stus-List Cradle measurments Hello, I have a C&C 30 that will require a cradle in a couple of weeks. I have made the base and the keel rest. I'm struggling with the length of the stands and wondering if I could get some insight. My cradle is 14' long by 77" wide, I have a 10" wide "C" channel keel bed that is 62 1/2" long. The keel bed is 69" from the front of the cradle and 37" from the rear of the cradle. I would like to put 8 stands plus a bow roller. Here is what I'm thinking for the stands: front two will be 1' 8" from center line Front aft two will be 2'7" from center line, in line with the front of the keel plate Rear two will be 3'2" from center line, in line with the rear of the keel plate Last two will be 2'4" from center line. I would appreciate any help, this will be a first for me having my boat craned onto a cradle and I'm queasy just thinking about it. Cheers Tom Power Invictus C&C 30 MK1 (Hull 501) Fredericton, NB ________________________________ _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
