Working on my Qm I have found patience a must. 😆
Sent from my Samsung device -------- Original message -------- From: Chris Hobson via CnC-List <cnc-list@cnc-list.com> Date: 2017-09-27 11:12 (GMT-04:00) To: cnc-list@cnc-list.com Cc: Chris Hobson <ch...@hobsonbuildsco.com> Subject: Stus-List Yanmar 2QM15 - Anti-seize, lock tight, gaskets Currently replacing fuel filters and doing general maintenance on a neglected engine. Replacing the zincs, tightening nuts, replacing hoses. And after switching out the zinc and tightening the nut I wondered if it should be putting a liquid gasket, blue lock tight or anti seize on there. What are the must-haves for protecting an engine when taking things apart and putting them back together? Chris Hobson S/V Going 1980 C&C MKI Hull 615 _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to:Â https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!