OK I really appreciate all of these comments about window replacement, (mostly because I have one coming up this spring myself); I have been trying to save them all on one document, but it has become a hodge-podge of separate comments and bits of advice; can anyone put all of this together in a some order...or as a flow chart? maybe it should be posted on the photo album? Many thanks: all of these comments are definitely appreciated!
Richard s/v Bushmark4: 1985 C&C 37 CB;Ohio River, Mile 696; On the hard for Winter.... Richard N. Bush 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -----Original Message----- From: Gary Russell via CnC-List <cnc-list@cnc-list.com> To: C&C List <cnc-list@cnc-list.com> Cc: Gary Russell <captnga...@gmail.com> Sent: Thu, Dec 14, 2017 11:53 am Subject: Re: Stus-List Window replacement Good point! I also put a 45 degree bevel on the back side of the Plexiglas to about half the thickness. I also put a very small bevel (1/16") on the front side just to protect any bare feet that might hit it. Gary ~~~~~~~_/)~~~~~~ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
