Joe What app do you use on your phone to display the targets? Joel
On Sat, Dec 23, 2017 at 8:59 PM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > Next snag - Turns out Navionics on Ipads does not support AIS. > I got the wifi link going, but I could not see any targets. Looked it up > when I got home and now I know why. iNavX will work, so I guess I'll be > grabbing that. > > OTOH the phone had no issue connecting to the $30 Yakker wifi access > point. More to follow once I go down there tomorrow, but if this works it > is a very good buy! > > I also need to consider how much belt and suspenders wiring to do. The VHF > could possibly run off the CP180 GPS instead of the AIS GPS. The AIS GPS > signal can feed the plotter if the GPS for that dies. I could probably > think of a few other things to cross connect too and end up with a mile of > wire. > > > > Joe Della Barba > > j...@dellabarba.com > > Coquina > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Joel > Aronson via CnC-List > *Sent:* Saturday, December 23, 2017 3:10 PM > > > *To:* cnc-list@cnc-list.com > *Cc:* Joel Aronson <joel.aron...@gmail.com> > *Subject:* Re: Stus-List AIS improvement + general rewiring > > > > I was able to connect my cheap Daisy2 AIS receiver to my onboard PC via > USB. And my plotter via 183. > > > > Lots of targets around Annapolis! > > > > Joel > > > > On Tue, Dec 19, 2017 at 1:13 PM Frederick G Street via CnC-List < > cnc-list@cnc-list.com> wrote: > > I don’t know of any gear that even supports AIS over 4800; everything > requires 38400 baud. > > > > > Fred Street -- Minneapolis > S/V *Oceanis* (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > > > > On Dec 19, 2017, at 12:04 PM, Della Barba, Joe via CnC-List < > cnc-list@cnc-list.com> wrote: > > > > Yes it does. If you have a lot of AIS targets they will totally overload a > 4800 baud channel. > > The plotter goes off to SH tomorrow. $35 to upgrade the firmware and $15 > more to wipe the MMSI from one of my old VHFs. I have to say Standard > Horizon is doing well by me today J > > Also props to MilltechMarine. I had one of their AIS receivers for years > and it has migrated to another C&C lately. > > > > Joe > > Coquina > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- > > Joel > 301 541 8551 > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Joel 301 541 8551
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
