Look at the sharkbite fittings. They seem to work on everything. Any Home Depot/Lowes/hardware store should have them
Joel On Fri, Jan 26, 2018 at 2:46 PM, T power via CnC-List <cnc-list@cnc-list.com > wrote: > Hello everyone: > I have a bit of an issue on my 1973 C&C 30 Mark 1. my forward water tank > underneath the v-berth has two small pieces of copper pipe protruding from > the tank, originally it had a hose attached to it that would lead to the > pump and the faucets. I would like to change out the hose to PEX tubing, > but I cannot figure out what size pex fitting to use. I have tried 3/8 15mm > 1/2 inch with no success. Has anyone ever tried this or have any > suggestions on what to do. > Any help is greatly appreciate it. > > Cheers > Tom > > Get Outlook for Android <https://aka.ms/ghei36> > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > > -- Joel 301 541 8551
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray