Had one since 1986. Replaced with a new one a few years ago. Works great. Joe. Coquina
Sent from my iPhone > On Feb 16, 2018, at 21:17, David Knecht via CnC-List <cnc-list@cnc-list.com> > wrote: > > I had a PSS put in on my 34 thinking it was a good upgrade, but on my 34+ > decided not to do it. The reason is that if not maintained properly, you can > have catastrophic failure of the PSS and sink the boat. I replaced the > packing with teflon on my 34+ 3 years ago and it was pretty trivial, has not > been touched since and hardly even drips. The worst that can happen is more > dripping and then you tighten the nuts. I recommend against it. Dave > > >> On Feb 16, 2018, at 9:05 PM, Brien Sadler via CnC-List >> <cnc-list@cnc-list.com> wrote: >> >> >> Has anyone changed to a PSS dripless stuffing box? I’m sold on the switch I >> just haven’t figured out how I’m going to run the vent line yet. Any >> suggestions would be great. Preliminary plan is to run it to a very small >> through hull at the top of the transom. >> >> Thanks, >> >> Brien >> >> >> Sent from my iPad >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you want to support the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray >> > > Aries > 1990 C&C 34+ > New London, CT > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray