I had garhauer do sheaves for our 33-2, slightly narrower than their stock 
ones. I sent one of the existing ones to them

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Dave S via CnC-List 
<cnc-list@cnc-list.com>
Sent: Saturday, February 17, 2018 11:09:08 AM
To: C&c Stus List
Cc: Dave S
Subject: Stus-List Masthead sheaves for 33-2?

Good day all.

Looking to replace windstar’s three masthead sheaves.  The existing sheaves are 
the originals, aluminum with a very shallow wire groove in the centre of the 
rope-radius groove.  I successfully re-bushed these a couple of years ago, 
however I switched to all rope halyards last year and it appears the main 
halyard is slightly fraying at the sheave.

Will my current sheave damage the halyard?  (The wire groove is very shallow - 
hard to imagine it’s an issue)

Suggestions as to a source?

Thanks!

Dave

Sent from my iPhone
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to