Zephyrworks http://zephyrwerks.com/default.html I replaced the aluminum main and jib halyard sheaves 2 years ago on my LF38 As I changed from wire/rope to MLX dyneema I didn’t want the wire groove to (maybe) damage the new ones. They shipped new sheaves around in a week, and they fitted perfectly.
Highly recommended. -----Original Message----- From: Dave S [mailto:syerd...@gmail.com] Sent: February-17-18 12:09 PM To: C&c Stus List Subject: Stus-List Masthead sheaves for 33-2? Good day all. Looking to replace windstar’s three masthead sheaves. The existing sheaves are the originals, aluminum with a very shallow wire groove in the centre of the rope-radius groove. I successfully re-bushed these a couple of years ago, however I switched to all rope halyards last year and it appears the main halyard is slightly fraying at the sheave. Will my current sheave damage the halyard? (The wire groove is very shallow - hard to imagine it’s an issue) Suggestions as to a source? Thanks! Dave Sent from my iPhone _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray