I replaced mine a couple of years ago. It was the same as the one I removed, but the outside was plastic, so it wouldn't rust. (The one I removed was so badly rusted, that the bottom just fell out.) What ever you get, make sure that it will fit.
Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR On Fri, Mar 2, 2018 at 11:04 AM, Marek Dziedzic via CnC-List < cnc-list@cnc-list.com> wrote: > I have to replace my water heater. I was wondering if there is a common > wisdom on which ones are good and which ones are to be avoided. It looks > like Kuuma, Camco and Seaward are available here (and all seem to look the > same or very similar). I am looking for a 5-6 gal. heater that can use the > engine coolant (and potentially AC, but this is secondary). > > Any recommendations (or warnings) would be appreciated > > thanks > > Marek > 1994 C270 “Legato” > Ottawa, ON > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://urldefense.proofpoint. > com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c= > clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r= > 9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=JJv19ySBtArLhiBt_ > VlEnxWhRwFSX8tsG_pT3poY8CY&s=sEh_rA9uSfwf1MVFJ7T_ > IOnGTwNdHou_nlZts5WlULM&e= > > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
