Doug, Am presently in The Bahamas returning to the states early July. Happy to call you then. The 39 is wonderful and happy you have one. Have so enjoyed mine.
Lloyd Lippe Finesse LF 39 Sent from my iPad > On May 28, 2018, at 5:50 PM, svrebeccaleah via CnC-List > <cnc-list@cnc-list.com> wrote: > > Thanks Lloyd, looks to be what I need to do. > I bought this boat a year ago and am still figuring it out. I would love to > compare notes and pick your brain about the LF39. > > > > Doug Mountjoy > Rebecca Leah > LF39 > Port Orchard YC, WA. > > > > -------- Original message -------- > From: LKL via CnC-List <cnc-list@cnc-list.com> > Date: 5/28/18 14:26 (GMT-08:00) > To: cnc-list@cnc-list.com > Cc: lklarchite...@gmail.com > Subject: Re: Stus-List LF39 mast removal > > Doug, > On mine, just remove the 4 base screws to the floor. Then it appears that you > will need to remove the glass rack and everything forward of the mast. > You should then be able to then slide the table aft. > It has been about 7 years since I did all this so am thinking that is what I > did. I recall raising the leafs and having to crawl under to do most of the > disassembly, really not hard. Will be easier if you have some help. > I think I have seen 2 different table arrangements on the 39, so hopefully we > have the same layout and my comments apply. > Hope all works out. > > Lloyd Lippe > Finesse > LF 39 > > Sent from my iPad > >> On May 28, 2018, at 5:06 PM, svrebeccaleah via CnC-List >> <cnc-list@cnc-list.com> wrote: >> >> Hi Lloyd, >> Do you have to remove the table top and leaves? That's what it's looking >> like. >> >> >> >> Doug Mountjoy >> Rebecca Leah >> LF39 >> Port Orchard YC, WA. >> >> >> >> -------- Original message -------- >> From: LKL via CnC-List <cnc-list@cnc-list.com> >> Date: 5/28/18 13:35 (GMT-08:00) >> To: cnc-list@cnc-list.com >> Cc: lklarchite...@gmail.com >> Subject: Re: Stus-List LF39 mast removal >> >> Hello Doug, >> If it is like mine, would suggest you removing the whole table. It really is >> not all that hard. >> >> Lloyd Lippe >> Finesse >> LF 39 >> >> Sent from my iPad >> >>> On May 28, 2018, at 4:19 PM, svrebeccaleah via CnC-List >>> <cnc-list@cnc-list.com> wrote: >>> >>> I am getting ready to pull my mast in July and am wondering how much of the >>> table I need to dissamble. There is a bottle storage area fwd of the mast >>> with slide out pieces fwd and aft of the cover. Any thoughts on this? >>> >>> >>> >>> Sent from my T-Mobile 4G LTE Device >>> Doug Mountjoy >>> Port Orchard YC >>> Rebecca Leah >>> Lf39 >>> _______________________________________________ >>> >>> Thanks everyone for supporting this list with your contributions. Each and >>> every one is greatly appreciated. If you want to support the list - use >>> PayPal to send contribution -- https://www.paypal.me/stumurray >>> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you want to support the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray >> > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
