On Kaylarah (37+) I had to reinforce the rudder assembly and then cut the rudder tube to insert the Edson Rudder Arm. See here <https://drive.google.com/open?id=1PxnlMnxH0HueWkyJDLNkBvv_0oWDnxlQ>. It works extremely well.
Gary S/V Kaylarah '90 C&C 37+ East Greenwich, RI, USA ~~~~~~~_/)~~~~~~ On Wed, Jun 6, 2018 at 1:38 PM, Don Marlin via CnC-List < cnc-list@cnc-list.com> wrote: > My boat is a 1983 C&C 40 AC. The aft part should be similar to most C&C > 40's. > > Thanks David. Specifically I was looking for ideas around the quadrant. > Right now the quadrant is tight between the rudder tube and the deck and > there is no space. I have seen others online who have used the existing > quadrant but I view this as option B. So I like to see what others have > done and then decide on the scope. Thanks Dave for the link, shelf looks > good and will ado[pt some ideas. I plan to use an Octopus drive and > Raymarine head. > > > On Wed, Jun 6, 2018 at 12:00 PM, <cnc-list-requ...@cnc-list.com> wrote: > >> Send CnC-List mailing list submissions to >> cnc-list@cnc-list.com >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> or, via email, send a message with subject or body 'help' to >> cnc-list-requ...@cnc-list.com >> >> You can reach the person managing the list at >> cnc-list-ow...@cnc-list.com >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of CnC-List digest..." >> >> >> Today's Topics: >> >> 1. >> >> Re: Below deck auto pilot installation for C&C 40 (David) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Wed, 6 Jun 2018 15:59:12 +0000 >> From: David <davidrisc...@msn.com> >> To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> >> Subject: Re: Stus-List Below deck auto pilot installation for C&C 40 >> Message-ID: >> <CY4PR16MB16538B32F89DCBCB7F319191DA650@CY4PR16MB1653.namprd >> 16.prod.outlook.com> >> >> Content-Type: text/plain; charset="windows-1252" >> >> Dave...call my cell to discuss. >> >> >> David F. Risch, J. D. >> >> Gulf Stream Associates, LLC >> >> (401) 419-4650 >> >> >> ________________________________ >> From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Dave Godwin >> via CnC-List <cnc-list@cnc-list.com> >> Sent: Wednesday, June 6, 2018 11:50 AM >> To: cnc-list@cnc-list.com >> Cc: Dave Godwin; Don Marlin >> Subject: Re: Stus-List Below deck auto pilot installation for C&C 40 >> >> Not 40? owner but perhaps the under-cockpit space in our 37? (1980?s >> version?) is similar. I did this<http://roninrebuild.blogs >> pot.com/2014/02/autopilots-from-wheel-to-below-deck.html>. Not perfect >> but it works. >> >> Best, >> Dave Godwin >> 1982 C&C 37 - Ronin >> Reedville - Chesapeake Bay >> Ronin?s Overdue Refit<http://roninrebuild.blogspot.com/> >> >> On Jun 6, 2018, at 11:34 AM, Don Marlin via CnC-List < >> cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: >> >> I am starting to plan a below deck Autopilot for my C&C 40. I have looked >> below and it is clear that I will need to make some modifications to >> support a tiller arm. I was wondering if there are any other 40 owners who >> could share pictures of their installations. Currently I have a wheel pilot >> and it is good for motoring and light winds. Looking for something more >> capable. >> >> Thanks in advance >> >> Don Marlin >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachm >> ents/20180606/dcb01df8/attachment-0001.html> >> >> ------------------------------ >> >> Subject: Digest Footer >> >> _______________________________________________ >> CnC-List mailing list >> CnC-List@cnc-list.com >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> ------------------------------ >> >> End of CnC-List Digest, Vol 149, Issue 21 >> ***************************************** >> > > > > -- > Don Marlin > (613) 832 4040 > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray