Nuts! Try the link here <https://drive.google.com/drive/folders/1PxnlMnxH0HueWkyJDLNkBvv_0oWDnxlQ?usp=sharing>. This time for sure. Gary S/V Kaylarah '90 C&C 37+ East Greenwich, RI, USA
~~~~~~~_/)~~~~~~ On Thu, Jun 7, 2018 at 8:14 AM, Gary Russell <captnga...@gmail.com> wrote: > For those who were having trouble accessing my autopilot project photos, > please try again here > <https://drive.google.com/file/d/15LatTEDvhPfzOdZCXQxouq4ZMZKd5Xoe/view?usp=sharing> > . > Gary > S/V Kaylarah > '90 C&C 37+ > East Greenwich, RI, USA > > ~~~~~~~_/)~~~~~~ > > > On Wed, Jun 6, 2018 at 10:30 PM, Gary Russell <captnga...@gmail.com> > wrote: > >> On Kaylarah (37+) I had to reinforce the rudder assembly and then cut the >> rudder tube to insert the Edson Rudder Arm. See here >> <https://drive.google.com/open?id=1PxnlMnxH0HueWkyJDLNkBvv_0oWDnxlQ>. >> It works extremely well. >> >> Gary >> S/V Kaylarah >> '90 C&C 37+ >> East Greenwich, RI, USA >> >> ~~~~~~~_/)~~~~~~ >> >> >> On Wed, Jun 6, 2018 at 1:38 PM, Don Marlin via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> My boat is a 1983 C&C 40 AC. The aft part should be similar to most C&C >>> 40's. >>> >>> Thanks David. Specifically I was looking for ideas around the quadrant. >>> Right now the quadrant is tight between the rudder tube and the deck and >>> there is no space. I have seen others online who have used the existing >>> quadrant but I view this as option B. So I like to see what others have >>> done and then decide on the scope. Thanks Dave for the link, shelf looks >>> good and will ado[pt some ideas. I plan to use an Octopus drive and >>> Raymarine head. >>> >>> >>> On Wed, Jun 6, 2018 at 12:00 PM, <cnc-list-requ...@cnc-list.com> wrote: >>> >>>> Send CnC-List mailing list submissions to >>>> cnc-list@cnc-list.com >>>> >>>> To subscribe or unsubscribe via the World Wide Web, visit >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> or, via email, send a message with subject or body 'help' to >>>> cnc-list-requ...@cnc-list.com >>>> >>>> You can reach the person managing the list at >>>> cnc-list-ow...@cnc-list.com >>>> >>>> When replying, please edit your Subject line so it is more specific >>>> than "Re: Contents of CnC-List digest..." >>>> >>>> >>>> Today's Topics: >>>> >>>> 1. >>>> >>>> Re: Below deck auto pilot installation for C&C 40 (David) >>>> >>>> >>>> ---------------------------------------------------------------------- >>>> >>>> Message: 1 >>>> Date: Wed, 6 Jun 2018 15:59:12 +0000 >>>> From: David <davidrisc...@msn.com> >>>> To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> >>>> Subject: Re: Stus-List Below deck auto pilot installation for C&C 40 >>>> Message-ID: >>>> <CY4PR16MB16538B32F89DCBCB7F319191DA650@CY4PR16MB1653.namprd >>>> 16.prod.outlook.com> >>>> >>>> Content-Type: text/plain; charset="windows-1252" >>>> >>>> Dave...call my cell to discuss. >>>> >>>> >>>> David F. Risch, J. D. >>>> >>>> Gulf Stream Associates, LLC >>>> >>>> (401) 419-4650 >>>> >>>> >>>> ________________________________ >>>> From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Dave >>>> Godwin via CnC-List <cnc-list@cnc-list.com> >>>> Sent: Wednesday, June 6, 2018 11:50 AM >>>> To: cnc-list@cnc-list.com >>>> Cc: Dave Godwin; Don Marlin >>>> Subject: Re: Stus-List Below deck auto pilot installation for C&C 40 >>>> >>>> Not 40? owner but perhaps the under-cockpit space in our 37? (1980?s >>>> version?) is similar. I did this<http://roninrebuild.blogs >>>> pot.com/2014/02/autopilots-from-wheel-to-below-deck.html>. Not perfect >>>> but it works. >>>> >>>> Best, >>>> Dave Godwin >>>> 1982 C&C 37 - Ronin >>>> Reedville - Chesapeake Bay >>>> Ronin?s Overdue Refit<http://roninrebuild.blogspot.com/> >>>> >>>> On Jun 6, 2018, at 11:34 AM, Don Marlin via CnC-List < >>>> cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: >>>> >>>> I am starting to plan a below deck Autopilot for my C&C 40. I have >>>> looked below and it is clear that I will need to make some modifications to >>>> support a tiller arm. I was wondering if there are any other 40 owners who >>>> could share pictures of their installations. Currently I have a wheel pilot >>>> and it is good for motoring and light winds. Looking for something more >>>> capable. >>>> >>>> Thanks in advance >>>> >>>> Don Marlin >>>> >>>> _______________________________________________ >>>> >>>> Thanks everyone for supporting this list with your contributions. Each >>>> and every one is greatly appreciated. If you want to support the list - >>>> use PayPal to send contribution -- https://www.paypal.me/stumurray >>>> >>>> >>>> -------------- next part -------------- >>>> An HTML attachment was scrubbed... >>>> URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachm >>>> ents/20180606/dcb01df8/attachment-0001.html> >>>> >>>> ------------------------------ >>>> >>>> Subject: Digest Footer >>>> >>>> _______________________________________________ >>>> CnC-List mailing list >>>> CnC-List@cnc-list.com >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> >>>> >>>> ------------------------------ >>>> >>>> End of CnC-List Digest, Vol 149, Issue 21 >>>> ***************************************** >>>> >>> >>> >>> >>> -- >>> Don Marlin >>> (613) 832 4040 >>> >>> _______________________________________________ >>> >>> Thanks everyone for supporting this list with your contributions. Each >>> and every one is greatly appreciated. If you want to support the list - >>> use PayPal to send contribution -- https://www.paypal.me/stumurray >>> >>> >>> >> >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray