I used Brightside on mine. Rolled and tipped. 3 coats.
Sanded the original anodised mast right down to full metal. Etched with WEST 2 part etc (No longer available) then primed with Zinc Chromate (No longer available) All of the “No longer available” I happened to find old stock around, with folks who didn’t know it has been banned. Looks amazing and has been up for 3 years with no problem. Brightside is not hard like the epoxy paint that Akzo Nobel sell, but It was straightforward to apply, once I learned to really, really thin it, and keep a wet edge. A few dings, of course, with the yellow chromate showing through till I touch it up. From: svrebeccaleah [mailto:svrebeccal...@gmail.com] Sent: July-13-18 4:08 PM To: cnc-list@cnc-list.com Subject: Stus-List Mast paint I am getting to repaint the mast on my 1988 LF39. Does anyone on here have a clue what paint C&C uses on their spars? The local chandlery suggested Interlux Brightside, not knowing what is currently on there. Any help would be appreciated. Thanks in advance Doug Sent from my T-Mobile 4G LTE Device Doug Mountjoy Port Orchard YC Rebecca Leah Lf39
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
