FWIW I like the multifunction nature of the i70.  You can reconfigure the 
display to include many or few data points, page through different layouts, 
etc.  One instrument rather than several, and with a nmea 2000 backbone its 
future proof.  (Ish). 

Don’t have wind inst (yet) but would first try my single i70 with that, and add 
a second if that wasn’t satisfactory.  
Ymmv of course....

Dave 



Sent from my iPhone

> On Dec 3, 2018, at 11:09 AM, Hoyt, Mike <mike.h...@impgroup.com> wrote:
> 
> Persistence has the i50/i60 series and previous boat had the ST60 series.
>  
> I50/i60 are very nice to use and easy to read.  I think the ST60 is a bit 
> more robust though.  The i50/i60 series are mounted with four tiny screws on 
> the corners that are covered by a bevel whereas ST60 had  much more robust 
> fasteners. I would think that if you had to remove these each Fall this could 
> be a point of concern.  Persistence is covered so I leave ours mounted making 
> this not a problem.
>  
> Functionally the i50/i60 are very good and I would not hesitate to go this 
> route again
>  
> Mike
> Persistence
> Halifax, NS
>  
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John and 
> Maryann Read via CnC-List
> Sent: Saturday, December 01, 2018 7:15 PM
> To: cnc-list@cnc-list.com
> Cc: John and Maryann Read
> Subject: Stus-List Instruments
>  
> Our ancient Standard Horizon suite of wind, speed and depth works well except 
> the apparent wind.  Am suspecting the sending unit electronics are in need of 
> replacement but none available.  The depth and speed work great.  We do not 
> have auto pilot and do not integrate with GPS, chart plotter or AIS as no need
>  
> We intend to upgrade the suite of wind, speed and depth and ask opinions of 
> which brand, etc to consider.  Am inclined to the Raymarine I60 / I50 suite 
> due to read outs are very readable, proven technology, lower cost, ready 
> availability of repair parts, can integrate with NMEA 2000 etc etc.  Hole 
> size in hull is same as current,  Would need to drill new holes in bulkhead 
> but have the room
>  
> https://www.defender.com/product3.jsp?name=raymarine-i50-i60-depth-speed-and-wind-systems-pack&path=-1|344|2028690|2028820&id=2086335
>  
>  
> Thoughts of the group?  Fred is this something you can deal with?
>  
>  
> John and Maryann
> Legacy III
> 1982 C&C 34
> Noank, CT
>  
>  
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to