Chuck,

I have the original M35 and a MaxProp classic 2-blade. I get 6.2 knots in calm water at 2200rpms. I'll look through my documents this week when I visit the boat and see if the pitch is mentioned. I'm replacing the cutlass bearing next month, so will check then when it is on the hard.

Mark Baldridge
~~~~~~~~~~~~~~~~~~~~~~_/)
'89 C&C37/40+ #30 "The Edge"
Surf City, NC

On 1/20/2019 3:55 PM, Rick Rohwer via CnC-List wrote:
I have the same prop but a Yanmar 35.  Deep keel.  Sounds very close to the same performance. I was looking to do the same tweaking on my next haul out.  Looking forward to other opinions on the subject.

I do love the difference under sail though compared to the fixed prop that was on the boat since purchase.

Rick Rohwer
Paikea 37+
Bremerton, WA

On Jan 20, 2019, at 9:15 AM, Chuck Saur via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:

I have a MaxProp classic, and a Universal 35 on Daydream.  The prop pitch appears very shallow, and when motoring, seems to be slow. (from memory of last September, 4.5 knots@ 2300rpms)

Any 37+ owners have this combination of prop and engine, and happen to know the correct pitch for the MaxProp prop?

And cheers from the Michigan Fridge...-12 in the UP this morning!!
*
*
*
*
*Chuck Saur*

(517)-490-5926
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and every one is greatly appreciated.  If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray



_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to