I'm glad it worked out. Somebody went to a lot of trouble to rivet and tap the 
mast for screws. I'd like to see inside that mast.


> On June 1, 2019 at 4:11 PM Daniel Cormier via CnC-List 
> <cnc-list@cnc-list.com> wrote:
> 
>     Thanks everyone! We were able to remove the mast today without a hitch. 
> The screws at the bottom weren’t screwed into anything, however I can see 
> that if we had a certain type of mast shoe they could be used to secure the 
> mast.
> 
>     Thanks so much!
>     Dan
> 
>     Sent from my iPhone
> 
>     On Jun 1, 2019, at 12:57 PM, CHARLES SCHEAFFER < cscheaf...@comcast.net 
> mailto:cscheaf...@comcast.net > wrote:
> 
> 
>         > >         Wow! Those three screwsat the bottom of the mast hold 
> something. Maybe a plug or maybe some component bolted through the mast step? 
> If you don't get a better answer, I'd remove them before the crane starts 
> pulling the mast. Once the mast is up a bit, you'll see what's involved there 
> and know better for future. I think I would remove all the screws in that 
> area, five each side.
> > 
> >         Offshore racing rules require the mast be bolted to the step, but 
> > one long bolt is usually used for that. Please send more pictures when 
> > she's lifted up.
> > 
> >         Thanks,
> >         Chuck S, Resolute, 1990 34R
> > 
> > 
> >             > > > On June 1, 2019 at 6:03 AM Dan via CnC-List < 
> > cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com > wrote:
> > > 
> > >             Hi all, 
> > >             I have a C&C44 and I'm removing my mast this afternoon for 
> > > the first time (my first time) and I've accessed the mast step (keel 
> > > stepped mast)
> > > 
> > >             There are a few screws/bolts going right around the base of 
> > > the mast close to the stepping point. I'm wonderring if these screws have 
> > > to be removed in order to pull the mast out? are the securing the mast to 
> > > the mast step?
> > > 
> > >             Here is a photo:
> > > 
> > >             
> > > https://drive.google.com/open?id=0B0TmWprZksmUa0o2eUZ0V1pabGpLaDRpeFJBOVozenJwNTFn
> > > 
> > >             Dan Cormier
> > >             Breakaweigh I
> > >             C&C44
> > >             Halifax, NS
> > >             _______________________________________________
> > > 
> > >             Thanks everyone for supporting this list with your 
> > > contributions. Each and every one is greatly appreciated. If you want to 
> > > support the list - use PayPal to send contribution -- 
> > > https://www.paypal.me/stumurray
> > > 
> > > 
> > >         > >          
> > 
> >     > 
 

> _______________________________________________
> 
>     Thanks everyone for supporting this list with your contributions. Each 
> and every one is greatly appreciated. If you want to support the list - use 
> PayPal to send contribution -- https://www.paypal.me/stumurray
> 
> 
 
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to