Good plan on ordering. I keep spare sensors and switches on the boat. I also tried a generic oil pressure sending unit once based on ohm range. It didn't work. I only order Westerbeke parts now for things like that.
Dennis C. On Fri, Jun 7, 2019 at 11:59 AM Nathan Post via CnC-List < cnc-list@cnc-list.com> wrote: > Dennis, > > The alarm was pulsing - like it does when you first turn the key on - so I > am pretty sure it is the oil pressure. Can’t get back out to the boat > until next week but I’ll check that circuit out with an ohm meter then. > Based on what Josh said that it is a “alarm when not connected” circuit, > then any disconnection in the wire to or from the switch or buzzer would > result it continuous alarm state (or it could be the switch). Westerbeke > stocks the oil pressure switch for this engine (and it was $35 so I went > ahead and ordered it). > > Nathan > S/V Wisper > 1981 C&C 34 > Lynn MA, USA > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray