I plan to be there—non-spin.See and meet you there. We have a slip at the Oriental Marina. Charlie
Sent from AOL Mobile Mail Get the new AOL app: mail.mobile.aol.com On Monday, July 22, 2019, John Conklin via CnC-List <cnc-list@cnc-list.com> wrote: Hope I can see it at dragons breath regatta in 2 weeks ? John Conklin S/V Halcyon On Jul 22, 2019, at 4:51 PM, Charlie Nelson via CnC-List <cnc-list@cnc-list.com> wrote: Probably although their video suggests trimming with a supplied cutting blade and then hand sanding the edges. Apparently the vinyl is pretty easy to trim. Sent from AOL Mobile Mail Get the new AOL app: mail.mobile.aol.com On Monday, July 22, 2019, John Conklin via CnC-List <cnc-list@cnc-list.com> wrote: Can you apply then nip clean and precise with a router bit ? John Conklin S/V HalcyonS/V Heartbeatwww.flirtingwithfire.com On Jul 22, 2019, at 3:52 PM, Charlie Nelson via CnC-List <cnc-list@cnc-list.com> wrote: That’s the plan— to use Plasteak. I invested in the roller and am about to order the vinyl. Originally thought I’d do it in place using their clear plastic sheet and cut the vinyl to fit, then glue it down in the boat. However I only have 4 big pieces and removing them is no big deal. Thus my latest plan is to do it off the boat which would be much easier on my back and my knees! I can also (I think) avoid the cost/shipping of the clear plastic sheet this way. My thought is to place pieces together as on the boat and then cover with the Plasteak and cut and glue it. Not quite sure if this will work since I won’t be able to see ‘through’ the vinyl for matching purposes as I might with the clear plastic. If I can get both vinyl and plastic shipped with only 1 $50 Fedex large piece shipping charge, I may get the plastic anyway @ $75. Charlie NelsonWater Phantom36 XL/kcb #077 Sent from AOL Mobile Mail Get the new AOL app: mail.mobile.aol.com On Monday, July 22, 2019, Dennis C. via CnC-List <cnc-list@cnc-list.com> wrote: Are you using PlasTeak or equivalent? Will look great when you finish. https://www.plasteak.com/plasteak-recycled-plastic-products/marine-grade-flooring I did a hatch cover on a trawler with PlasDek, the exterior version. The job was straightforward. Get a laminate roller from a big box store. I used one of these: https://www.lowes.com/pd/Kobalt-Extension-Handle-Roller/3030693 PlasTeak folks were easy to work with. I had the piece custom made by them with borders. Here's a pic of the finished job: https://drive.google.com/open?id=0B_sb5TfIENvsV2NVZ1hmaGJ6cEU Dennis C.Touche' 35-1 #83Mandeville, LA On Mon, Jul 22, 2019 at 11:57 AM Charlie Nelson via CnC-List <cnc-list@cnc-list.com> wrote: Listers; I am considering re-doing my cabin sole (for the 2nd time!) using a glue-on vinyl laminate directly over the old sole. Only the thin teak and holly veneer of the sole is bad--otherwise the screwed-in boards (4) that make up the sole are fine. After about 10+ years of racing crew activity (mostly throwing cans, bottles down below plus occasionally dropping of other gear on the sole (winch handles, etc. ) along with a previous short-lived attempt of mine to sand the current veneer, it's time to do this job right and for less than the 2 boat bucks it cost when I had the yard do it previously (they replaced entire sole). I will remove the pieces and glue the vinyl to the old veneer, which can be trimmed with a knife, to get reasonable matches to the teak and holly pattern. Have any listers gone this route with sprucing up their cabin sole? If so, are there any pitfalls to avoid before I begin this latest DIY project? Thanks in advance, Charlie Nelson1995 C&C 36 XL/kcbWater Phantom_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray