Hi Dave,
Many years ago I had low voltage on alternator
output and found it to be a bad diode in the
rectifier... just one more thing to check.
Cheers, Russ
At 01:40 PM 8/9/2019, you wrote:
Hi All,Â
I have a yanmar 2GMf20 with what I believe is
the stock 55 amp alternator.  I noticed that
my ACR was not combining batteries, which led me
to research a bit then measure the voltages on
each bank, and then at the alternator âBattâ terminal. Â
Irrespective or RPM or battery state, the
voltage at the BATT terminal does not exceed
12.63 in operation.  (he ACR therefore
doesnât âseeâ a charging state) Â The belt is new and not slipping.Â
This suggests and alternator or regulator
problem.  Does this make sense? Is there anything else I should check?
If I end up replacing the regulator, are there
better options for this alternator than stock?
Thanks All.
Dave
Sent from <https://go.microsoft.com/fwlink/?LinkId=550986>Mail for Windows 10
_______________________________________________
Thanks everyone for supporting this list with
your contributions. Each and every one is
greatly appreciated. If you want to support the
list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray