This looks a lot like the motor in my Nicro vent, it would depend on the shaft size which isn't listed.
https://www.amazon.com/Small-Electric-slower-Stevens-International/dp/B00TL4FMCC Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On Sat, 10 Aug 2019 at 13:20, Dennis C. via CnC-List <cnc-list@cnc-list.com> wrote: > Touché’s Marinco/Nicro model 20703 3 inch solar vent motor died. I bought > a new 20703 and installed it. Marinco no longer makes the 20703. It’s now > the 20803. > > Anyway, the solar panel in the old one still puts out 2.2+ vdc. It’s the > motor that’s dead. I think the motor is just a 1.5-3 vdc small hobby motor. > They cost about $5. On the old motor are “227” and “2E29”. The motor is > about 1 3/8 inch diameter and 1 inch tall. Don’t know the rpm. > > I haven’t been able to find or cross reference the darn thing. Would be > nice to fix the old one as a spare. > > Anybody know where I can find one or what a good industry number for one > is? > > I may hit a couple hobby shops to see if they can reference it. > > Dennis C. > Touché 35-1 #83 > Mandeville, LA > > Sent from my iPhone > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray