Hi there,
Not exactly what you're looking for but I laboured over the flexible / rigid
panel installation and finally went with flexible. I thought others may be
interested also.
- 2 x 100 watt panels
- 2 x nylon straps pulled tight side to side over the bimini
- panel edges protected covered with pipe insulation to protect bimini
- panels zap strapped to bimini
- pool noodle squeezed over front edge of panels to "flatten" the fore-aft
profile
5 minutes to remove and 10 minutes to replace. I leave them on April to
November and will stow below for the winter.
Andy
33-2
-----Original Message-----
From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of
cnc-list-requ...@cnc-list.com
Sent: September 21, 2019 9:00 AM
To: cnc-list@cnc-list.com
Subject: CnC-List Digest, Vol 164, Issue 52
Send CnC-List mailing list submissions to
cnc-list@cnc-list.com
To subscribe or unsubscribe via the World Wide Web, visit
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
or, via email, send a message with subject or body 'help' to
cnc-list-requ...@cnc-list.com
You can reach the person managing the list at
cnc-list-ow...@cnc-list.com
When replying, please edit your Subject line so it is more specific than "Re:
Contents of CnC-List digest..."
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
