Bruce, Rod, Et Al Here is a link to some pictures of my Lonseal cabin sole install. Cabin Sole
Sorry Rod I down race so I can’t answer your questions. My opinion; the product itself is a superior vinyl product and with proper installation there should be no issue. That being said if you drop something the Lonseal will hold up well but the substrate may dent and be visible. Some tips Design substrate (plywood) with as few seams as possible. Router bottom outsides edges with ½” router Apply a minimum of 2 coats of epoxy to all pieces on all sides Roll out the Lonseal on a solid flat surface (living room floor) upside down then lay plywood upside down in the pattern it will be applied. Cut Lonseal at least 1” larger than required on all side. Makes it easier to install and easier to trim after glue is set. Tape joints like you would with drywall. I didn’t. Use j-roller instead of recommended 100 lb. roller. See mod I made to j-roller so I could apply more weight Follow gluing instructions to the letter especially the off gassing. I didn’t and some bubbles occurred that couldn’t be rolled out. Use router with edge trimmer to cut bilge ports. I was lucky that my sole was a bit narrower than the LonSeal. Just ensure the pieces in the v-berth and the small piece in the galley lines all line up. Same thing for the bilge access ports. I had to make a small lengthwise cut around the mast truck to fit around the centreboard tube. It can’t be seen unless you really look for it. Mike From: bwhitmore via CnC-List Sent: November 10, 2019 7:11 AM To: cnc-list@cnc-list.com Cc: bwhitmore Subject: Re: Stus-List Fwd: Fwd: Cabin Sole resurfacing Hi Mike and group, If anyone has good photos of the installed Lonseal PlasTeak product, I'd like to see them. As much as I am a traditionalist, ease of repair my win out. I'd really like to know if you can notice a distinct difference between this and real teak. Thanks! Bruce Sent from Samsung tablet. -------- Original message -------- From: Mike Taylor via CnC-List <cnc-list@cnc-list.com> Date: 11/9/19 4:42 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Mike Taylor <persuasio...@gmail.com> Subject: Stus-List Fwd: Fwd: Cabin Sole resurfacing Hi Rod Here is a link to the product I purchased from Defender. Correction on product name. PlasTeak is the trade name. Lonseal makes them all. https://www.defender.com/product3.jsp?path=-1%7C2276179%7C2276198%7C2276201&id=3325405 I’m on the east coast now I could provide pics next week when I get home. Mike Begin forwarded message: From: Rod Stright <strig...@eastlink.ca> Date: November 9, 2019 at 5:06:27 PM AST Cc: Mike Taylor <persuasio...@gmail.com> Subject: Re: Stus-List Fwd: Cabin Sole resurfacing Can you send additional info haven’t heard of it here. Thanks Rod Sent from my iPhone On Nov 9, 2019, at 4:46 PM, Mike Taylor via CnC-List <cnc-list@cnc-list.com> wrote: Dave I went with PlasTeak a few years ago. New plywood with 2 coats of West system epoxy. Looks real good. Got it at Defender. Can send some tips and pics if you desire. Mike Begin forwarded message: From: David Knecht via CnC-List <cnc-list@cnc-list.com> Date: November 9, 2019 at 9:22:28 AM AST To: CnC discussion list CnC <cnc-list@cnc-list.com> Cc: David Knecht <davidakne...@gmail.com> Subject: Stus-List Cabin Sole resurfacing Reply-To: cnc-list@cnc-list.com The cabin sole on my boat is not in great shape. There are areas where the holly stripes and are gone or pulling away. I am considering what to do and have a vague recollection of someone using a glue-on faux teak/holley covering over the wood (Nautikflor?) but I can’t find that discussion anywhere in the archives. Has anyone done that? Thanks- Dave S/V Aries 1990 C&C 34+ New London, CT <pastedGraphic.tiff> _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray