John, I may still have those style levers from the original 1982 Edson installation on our boat. I’ll need to do some “searching” through my sheds filled with junk but that is a process I’m already engaged in at the moment.
If found, free. Regards, Dave Godwin 1982 C&C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit <http://roninrebuild.blogspot.com/> > On Jul 6, 2020, at 8:31 AM, Chuck Gilchrest via CnC-List > <cnc-list@cnc-list.com> wrote: > > John, > The levers you describe are no longer made by Edson. It’s conceivable that > you could 3D print a new one from the existing pieces but chances are good > you will need to swap out engine controls to either an Edson 870 or 816 > control housing. Your cables would get re routed inside the pedestal and you > would lose the extra tubes. > > I believe the control on the boat is currently a model 737 control. > Chuck Gilchrest > S/V Half Magic > 1983 Landfall 35 > (With the same engine controls) >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray