I Would be very grateful for those Dave!! If find em please let me know or any other goodies you would like to part with from my sister ship :) happy to pay/donate/ship... Thanks again Sir!
John Conklin S/V Halcyon S/V Heartbeat www.flirtingwithfire.com On Jul 6, 2020, at 9:35 AM, Dave Godwin via CnC-List <cnc-list@cnc-list.com> wrote: John, I may still have those style levers from the original 1982 Edson installation on our boat. I’ll need to do some “searching” through my sheds filled with junk but that is a process I’m already engaged in at the moment. If found, free. Regards, Dave Godwin 1982 C&C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit<http://roninrebuild.blogspot.com/> On Jul 6, 2020, at 8:31 AM, Chuck Gilchrest via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: John, The levers you describe are no longer made by Edson. It’s conceivable that you could 3D print a new one from the existing pieces but chances are good you will need to swap out engine controls to either an Edson 870 or 816 control housing. Your cables would get re routed inside the pedestal and you would lose the extra tubes. I believe the control on the boat is currently a model 737 control. Chuck Gilchrest S/V Half Magic 1983 Landfall 35 (With the same engine controls) _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray