Maybe I was a little unclear on this last post, what I was getting at is that if you need a new (another) paddle wheel, you can have this one I removed.
Bill Coleman Erie PA From: Bill Coleman [mailto:colt...@gmail.com] Sent: Monday, August 10, 2020 5:28 PM To: 'cnc-list@cnc-list.com' Subject: RE: Stus-List speedometer - C&C 35 Mk2 Absolutely Inconceivable!! I have an old transducer here that I cut out of my boat, with 4 Paddles, and 2 magnets. Bill Coleman Erie PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of General Gao via CnC-List Sent: Monday, August 10, 2020 2:46 PM To: cnc-list@cnc-list.com Cc: General Gao Subject: Re: Stus-List speedometer - C&C 35 Mk2 I verified the paddle before launch, I only have one magnet and it is there. No abnormalities found there. Bo On Mon, Aug 10, 2020 at 9:51 AM Bill Coleman via CnC-List <cnc-list@cnc-list.com> wrote: Heh heh! No doubt where that entered my lexicon. I have at least a dozen regularly used lines from that movie! Bill From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ & Melody via CnC-List Sent: Friday, August 07, 2020 10:53 PM To: cnc-list@cnc-list.com Cc: Russ & Melody Subject: Re: Stus-List speedometer - C&C 35 Mk2 Hi Bill, You bring me a smile with this. It's inconceivable! I love the movie. The missus & I watch it at least once every year. https://www.youtube.com/watch?v=qhXjcZdk5QQ Cheers, Russ At 06:43 AM 8/5/2020, you wrote: It is inconceivable that a magnet could be missing, unless you are missing an entire leg of one of the four paddles, as they are molded right inside the plastic. Did you pull it out and check it with a magnet? Bill Coleman Erie PA Cc: Russ & Melody Subject: Re: Stus-List speedometer - C&C 35 Mk2 What is the number o' magnets supposed you be on the paddle-wheel? If it is more than one then one is missing, Cheers, Russ At 09:57 AM 8/4/2020, you wrote: Content-Type: multipart/alternative; boundary="------------3255BA44138849C8E1038307" Content-Language: en-US One possible thing is the calibration is way off. Joe Coquina On 8/4/2020 12:21 PM, General Gao wrote: I wanted to come back to this thread. Did some cleaning on land, had my daughter rotated the Hall effect sensor, the needle moved, thought it was all good. We later launched the boat and it turned out that the reading was off still. It read about half of what it was supposed to be. What would this indicate? Thanks, Bo _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray