Hello Ron, I rebuilt my whole fuel system and installed a fuel filter/water seperator and had no problem with fuel flow, make sure your tank vent is clear. Lewis S/V For Play C&C 30-1 #45 Lorain, OH
On Sep 11, 2020 1:12 AM, "Ronald B. Frerker via CnC-List" < cnc-list@cnc-list.com> wrote: > Well, I did yoga for a month, waited for a day under 90F and finally > worked up the nerve to replace my fuel pump with a spare I've carried for > the last 15-20yrs. The bending and contourtions were painful, but the job > was accomplished. > Unfortunately, when I turned the power on, I heard the vibration of the > pump, but it pumped no fuel. The tank is full and the flow valve is open. > I have no filter between the tank and the pump. > So two questions: > 1. Could the pump have deteriorated during the period I was holding it in > reserve? > 2. Is there more to the install that I"m not aware of? I thought the > pumps were self priming, so that shouldn't be the problem. > My manual only shows the diagram without any instructions so I presumed it > was straight forward. > Ron > Wild Cheri > C&C 30-1 > STL > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
