Thanks Dennis! Another project to tackle this winter.
Joel On Mon, Dec 7, 2020 at 1:10 PM Dennis C. <capt...@gmail.com> wrote: > It works. 3vdc. The battery is 1.5 I think. > > There may be a better choice. Just need to get the motor and shaft > diameters right and the voltage close. > > -- > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > On Mon, Dec 7, 2020 at 10:40 AM Matthew <wolf...@erie.net> wrote: > >> Is that the correct voltage? >> >> >> >> *From:* Dennis C. <capt...@gmail.com> >> *Sent:* Monday, December 07, 2020 11:35 AM >> *To:* Stus-List <cnc-list@cnc-list.com> >> *Subject:* Stus-List Re: Solar Vents >> >> >> >> FWIW, the motor I used to replace the original in my Nicro/Marinco vent >> was this: >> >> >> >> >> https://www.amazon.com/gp/product/B00E4WQENM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&fpw=alm >> >> >> >> Wasn't a direct replacement but if one is somewhat handy, one should make >> it work. >> >> >> >> Although any RF-500TB motor should work. Here's a copy of the specs on >> the one above: >> >> >> >> · Voltage: 3V >> >> · Voltage range: 1-3V >> >> · Rated power output: 0.29W >> >> · Current at max. efficiency: 175mA >> >> · Max. efficiency: 60% >> >> · Max.Torque: 68.01 g-cm >> >> · Max. RPM: 2104 >> >> · No load RPM: 2700 >> >> · No load current: 55mA >> >> · Shaft size: 0.078" Diameter x 0.34"L >> >> · Motor Size: 1.25" Diameter x 0.77"L >> >> -- >> >> Dennis C. >> >> Touche' 35-1 #83 >> >> Mandeville, LA >> Thanks to all of the subscribers that contributed to the list to help >> with the costs involved. If you want to show your support to the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> Thanks - Stu > > > > -- > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Joel
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu