Excellent. Thanks.
From: Dennis C. <capt...@gmail.com> Sent: Monday, December 07, 2020 1:09 PM To: Stus-List <cnc-list@cnc-list.com> Subject: Stus-List Re: Solar Vents It works. 3vdc. The battery is 1.5 I think. There may be a better choice. Just need to get the motor and shaft diameters right and the voltage close. -- Dennis C. Touche' 35-1 #83 Mandeville, LA On Mon, Dec 7, 2020 at 10:40 AM Matthew <wolf...@erie.net <mailto:wolf...@erie.net> > wrote: Is that the correct voltage? From: Dennis C. <capt...@gmail.com <mailto:capt...@gmail.com> > Sent: Monday, December 07, 2020 11:35 AM To: Stus-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > Subject: Stus-List Re: Solar Vents FWIW, the motor I used to replace the original in my Nicro/Marinco vent was this: https://www.amazon.com/gp/product/B00E4WQENM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8 <https://www.amazon.com/gp/product/B00E4WQENM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&fpw=alm> &psc=1&fpw=alm Wasn't a direct replacement but if one is somewhat handy, one should make it work. Although any RF-500TB motor should work. Here's a copy of the specs on the one above: * Voltage: 3V * Voltage range: 1-3V * Rated power output: 0.29W * Current at max. efficiency: 175mA * Max. efficiency: 60% * Max.Torque: 68.01 g-cm * Max. RPM: 2104 * No load RPM: 2700 * No load current: 55mA * Shaft size: 0.078" Diameter x 0.34"L * Motor Size: 1.25" Diameter x 0.77"L -- Dennis C. Touche' 35-1 #83 Mandeville, LA Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu -- Dennis C. Touche' 35-1 #83 Mandeville, LA
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu