For now there no compression sadly On Sun, Apr 11, 2021 at 7:06 PM dwight veinot via CnC-List < cnc-list@cnc-list.com> wrote:
> Check the points and make sure the gap is set right > > On Sun, Apr 11, 2021 at 3:36 PM Joel Delamirande via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Good afternoon gentlemen >> Does anyone have done a overhaul on the atomic 4 >> I’m trying to start this engine and getting frustrated of getting no >> results >> I’ve been following the Moyer marine video and still no luck >> Here what I did >> New spark plug and rotor >> New dc wiring >> New starter >> There spark at the coil >> I tried many times to do the dead center alignment assuming the engine >> was rebuilt according to universal specs >> New dip stick >> I’m I missing something >> I’ve tried gaz in the spark plug hole >> Results oil and gaz shoots out at the flame aresstor >> Give me a call or text 905 818-1336 >> > -- >> Joel Delamirande >> *www.jdroofing.ca <http://www.jdroofing.ca>* >> >> Thanks to all of the subscribers that contributed to the list to help >> with the costs involved. If you want to show your support to the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> Thanks - Stu > > -- > Sent from Gmail Mobile > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Joel Delamirande *www.jdroofing.ca <http://www.jdroofing.ca>*
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
