Thx Joe. Unfortunately I am not equipped to do this...need to start preparing the admiral to approve a big budget!
On Sun, Apr 25, 2021 at 10:08 AM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > I saw a boat that was only about 3 years old with a rudder split from ice. > Some people have holes drilled in their rudders at the bottom they drill > out in the fall and then epoxy closed before launch. My boat is not out of > the water in the winter, so I have not had this issue. > > A buddy with a C&C 35 MK II had rudder issues and brought the rudder home > as a project. He managed to cut a big section of skin off, scoop out all > the wet foam, fill the space with an epoxy mix, and epoxy the skin back on. > > Also note you can just buy a new rudder 😉 > > > > > > Joe Della Barba > > Coquina C&C 35 MK I > > Kent Island MD USA > > > > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
