Joe (and any other 35-1 owners),
I've looked at that as a sealer inside the deck ring at the partners,
and I'm wondering how you managed to plug the bottom of the ring. On my
boat there's almost no clearance between the head's longitudinal
bulkhead and the mast, were you able to work clay into that space?
Neil Gallagher
Weatherly 35-1
Glen Cove, NY
On 4/27/2021 8:50 AM, Joe Della Barba via CnC-List wrote:
Remember the Spartite kit comes with clay to plug the gap, you’ll need
some modeling clay too.
Joe Della Barba
Coquina C&C 35 MK I
Kent Island MD USA
*From:* Rod Stright via CnC-List <cnc-list@cnc-list.com>
*Sent:* Tuesday, April 27, 2021 3:40 AM
*To:* 'Stus-List' <cnc-list@cnc-list.com>
*Cc:* Rod Stright <strig...@eastlink.ca>
*Subject:* Stus-List Re: Alternate to Spartite
Thanks Paul that looks like it would work
*From:* s/v Johanna Rose via CnC-List <cnc-list@cnc-list.com
<mailto:cnc-list@cnc-list.com>>
*Sent:* April-26-21 10:16 PM
*To:* cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
*Cc:* dre...@gmail.com <mailto:dre...@gmail.com>
*Subject:* Stus-List Re: Alternate to Spartite
Rod,
I have a copy of Wally’s Stella Blue page where he uses a Spartite
alternative purchased from McMaster-Carr (part number 8644K18).
Paul E
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu
